PoE Injector Industrial Gigabits IEEE 802.3bt 95W Power 1.25G 2.5G 5G 10G
PoE Injector Advantages
Specifications
Ethernet | |
Standards: | IEEE802.3i 10 BASE-T, IEEE802.3u 100 BASE-TX, IEEE 802.3ab Gigabit Ethernet |
IEEE802.3 x Flow Control | |
Processing Type: | Forward |
Half-duplex, Full-duplex | |
Forward Filter Rate: | 1,488,000pps (1000Mbps) |
Cabling: | 1000Base-T: Cat5 or above |
Maximum Distance: | Cat5 UTP up to 100m |
Connector: | 2x RJ45 |
Environmental | |
Operating Temperature: | -40°C to 80°C (-40°F to 176°F) |
Storage Temperature: | -40°C to 85°C (-40°F to 185°F) |
Relative Humidity: | 5% to 95% non-condensing |
MTBF: | >200,000hrs |
Electrical and Mechanical | |
Input Power: | 12~48VDC (Terminal Block) |
Power Consumption: | 100W Max. |
PoE: | |
Standard: | IEE802.3af/at/bt |
Data provide over pairs 1,2TX and 3,6RX | |
Power over spare pairs 1,2,4,5(+) and 3,6,7,8(-) | |
Max. Power per Port: | 95W Max per port (Alternative B Mode) |
Dimensions (WxDxH): | 95 x 70 x 30 mm |
Weight: | 0.25Kg |
Casing: | Aluminum Case |
Mounting Options: | DIN-Rail / Wall-mount |
Overview
The LNK-INJ301-90 Series product is an Industrial hardened Gigabit single-port PoE+ IEEE 802.3bt / LTPoE++ 95W 10/100/1000Base-TX PoE Injector.
Order Information
LNK-INJ301-90 | 12~48V DC Power Input Industrial 1.25G 95W PoE++ Injector, standalone, Support DIN-Rail mounting and Wall mounting installation, not including power supply adapter |
LNK-INJ401-90 | 12~48V DC Power Input Industrial 2.5G 95W PoE++ Injector, standalone, Support DIN-Rail mounting and Wall mounting installation, not including power supply adapter |
LNK-INJ501-90 | 12~48V DC Power Input Industrial 5G 95W PoE++ Injector, standalone, Support DIN-Rail mounting and Wall mounting installation, not including power supply adapter |
LNK-INJ601-90 | 12~48V DC Power Input Industrial 10G 95W PoE++ Injector, standalone, Support DIN-Rail mounting and Wall mounting installation, not including power supply adapter |