3.5mpa OEM Clamp Flat Diaphragm Pressure Transmitter Industrial Pressure Sensor
BP93420-IQ Pressure Transmitter Introduction of Industrial Pressure Sensor: The BP93420-IQ pressure transmitter is widely used in various industrial applications, such as chemical processing, oil and gas, and manufacturing. Its high-quality components and advanced design provide accurate and precise pressure measurements, even in harsh environments. The full metal flush diaphragm and direct welding with the process connection ensure that there are no dead spaces or crevices where particles can accumulate, making it easy to clean and maintain Product Features of Industrial Pressure Sensor:
1. Wide measurement range,Various pressure interface options
2. Diverse output signal options
3. Adjustable zero and full-scale
4. High accuracy Applications of Industrial Pressure Sensor:
1. Suitable for measuring non-corrosive gases and liquids with 316L
2. Medical, biopharmaceutical, and food hygiene industries for sterile processing
3. Used in the paper and chemical industries Performance Parameters |
Measurement Range | -100kPa…0kPa ~ 35kPa…3.5MPa |
Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
Overload | ≤ 1.5 times of the rated range |
Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
Repeatability | ≤0.1%FS |
Hysteresis | ≤0.1%FS |
Long-Term Stability | ±0.1%F.S/Year(Typical) ±0.2%F.S/Year(Maximum) |
Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
Frequency Response | 2.4Khz |
Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
Operating Temperature | -20ºC~80ºC |
Storage Temperature | -40ºC~120ºC |
Vibration | 10g,55Hz ~ 2kHz |
Housing Material | 304,316L |
Diaphragm Material | 316L |
Insulation Resistance | 100MΩ 100VDC |
Explosion-proof Rating | Ex db IIC T6 Gb |
Protection Rating | IP65 |
O-Ring Seal | Fluoro rubber |
Weight | ~0.2kg |
Output Signal | Supply Voltage | Output Type |
4~20mA | 12~30VDC | 2/3/4 wire |
0~10/20mA | 3 wire |
0/1~5V |
0/1~10V |
0.5~4.5V | 5VDC |
1. When selecting the product, please ensure that the medium to be measured is compatible with the contact parts of the product.
2. To ensure reliable operation of the product, it is recommended that users install lightning protection devices on-site and ensure that the product and power supply are reliably grounded.
3. The rated working temperature range of the Fluoro rubber O-ring is -20ºC to 250ºC. When the product's operating temperature is below -20ºC, it is necessary to choose an EPDM O-ring seal.
4. For special requirements such as strong vibration, instantaneous impact force, strong electromagnetic or radio frequency interference, please inform our company and specify them in the order.
Order Guide |
BP93420XX | Pressure Transmitter |
| Code | Outline Construction |
IB | General Pressure Transmitter | IX | Display Pressure Transmitter |
IE | Shock-resistant Aviation Pressure Transmitter | IIC/III | Industrial General/ Display Pressure Transmitter |
IF | Moisture-proof Pressure Transmitter | IIE/IIIE | General/Display Pressure Transmitter |
IN | Air Conditioning Dedicated Pressure Transmitter | | |
IC | High-temperature Pressure Transmitter | | |
IQ1/IQ2 | Large Diaphragm /High-temperature Pressure Transmitter | | |
| Measurement Range | -100kPa…0kPa ~ 35kPa…3.5MPa |
(0-X)Kpa or MPa | X: Indicates the Actual Measuring Range |
| Code | Power Supply |
D1 | 24VDC |
D2 | 5VDC |
D3 | Other |
| Code | Output Signal |
S1 | 4~20mADC | S5 | 0~20mADC |
S2 | 1~5VDC | S6 | 0~10VDC |
S3 | 0~5VDC | S7 | 0.5~4.5VDC |
S4 | 0~10mADC | | |
| Code | Pressure Connection |
J1 | M20×1.5 |
J2 | G1/2 |
J3 | G1/4 |
J4 | 7/16-20UNF |
J5 | Other |
| Code | Electrical Connection |
B1 | Hirschmann |
B2 | PG7 Plug |
B3 | Sealed Cable Output |
B4 | 2088 Industrial Casing |
B5 | 2088 Industrial Casing with Display |
B6 | Other |
| Code | Pressure Type |
G | Gauge Pressure |
A | Absolute Pressure |
S | Sealed Reference Pressure |