BH93420 I Water level sensor
Introduction of water level transmitter sensor:
The BH934520-IT is an exceptional liquid level transmitter engineered to excel in the measurement of liquid or gas height, even in the most challenging conditions. Its all-welded structure and PTFE cable provide unparalleled protection against the rigors of high temperatures, corrosive media, and highly permeable substances. This remarkable resilience positions the BH934520-IT as a reliable choice for the monitoring and control of liquid or gas levels in a wide array of industrial applications, from tanks and containers to pipelines and beyond, making it a versatile solution across diverse industries, including industrial, chemical, pharmaceutical, and environmental protection.
Product Features of water level transmitter sensor:
1. Full stainless steel housing, suitable for various testing environments.
2. Immersion-type probe measurement, easy installation.
3. Diverse output signal options.
4. Explosion-proof marking: ExiaIICT6.
5. High protection rate: IP68.
6. PE or PU or PTFE cable.
Applications of water level transmitter sensor:
Performance Parameters of water level transmitter sensor | |
---|---|
Measurement Range | 0~10m…400m |
Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
Overload | ≤ 2X rated range |
Accuracy @ 25ºC | ±0.25% (Typ.) ±0.5% (Max.) |
Repeatability | ±0.03% (Typ.) ±0.05%FS (Max.) |
Hysteresis | ±0.03% (Typ.) ±0.05%FS (Max.) |
Long-Term Stability | ±0.2%F.S/year (Max.) |
Zero Temperature Drift | ±0.01%FS/ºC(>100KPa), ±0.02%FS/ºC (≤100Kpa) |
Span Temperature Drift | ±0.01%FS/ºC(>100KPa), ±0.02%FS/ºC (≤100Kpa) |
Compensation Temperature | 0-50ºC (0-1m. 0-2m ); 0-70ºC |
Operating Temperature | -20~80ºC |
Storage Temperature | -30~100ºC |
Vibration | 10g,55Hz ~ 2kHz |
Housing Material | 1Cr18Ni9Ti |
Diaphragm Material | 316L Stainless Steel |
Insulation Resistance | >=100MΩ@100VDC |
Explosion-proof Rating | ExiaIICT6 |
Protection Rating | IP67, IP68 |
O-Ring Seal | Fluoro rubber |
Weight | ~0.3Kg (without cable) |
Cable Material | Polyethylene, Polyurethane |
Output Signal | Supply Voltage | Output Type |
4~20mA | 12~30VDC | 2/3/4 wire |
0~10/20mA | 3 wire | |
0/1~5V | ||
0/1~10V | ||
0.5~4.5V | 5VDC | |
RS485 Communication Protocol | 3.6~30V / Battery | 4 wire |
Ordering tips |
1. When selecting a product, please ensure that the medium under test is compatible with the contact part of the product.
2. When placing an order, please note that explosion-proof products do not include a digital display.
3. When ordering a transmitter with an LCD or LED display head, the power supply of the transmitter should not be lower than 20VDC.
4. In order to ensure the reliable operation of the product, it is recommended that users install lightning protection devices on the site and ensure that the product and the power supply are reliably grounded.
5. Fluorine rubber o-rings rated operating temperature range for - 20 ℃ ~ 250 ℃. When operating temperatures fall below -20 ° C, EPDM O-type sealing rings should be selected.
6. The cable does not come with default cable attached. If you require cable, there are three materials to choose from. If no specific instructions are given, polyethylene cable materials will be used by default.If different cable materials are required, please indicate in your order form.
7.In case of special requirements such as strong vibration, instantaneous impact,strong electromagnetic or radio frequency interference , please inform us and indicate in your order.
Order Guide | ||||||||
BH93420 | Code | Outline Construction | ||||||
I | Pressure Transmitter | |||||||
Measurement Range | 0~10m…400m | |||||||
Code | Power Supply | |||||||
D1 | 24VDC | |||||||
D2 | 5VDC | |||||||
D3 | Other | |||||||
Code | Output Signal | |||||||
S1 | 4~20mADC | S5 | 0~20mADC | |||||
S2 | 1~5VDC | S6 | 0~10VDC | |||||
S3 | 0~5VDC | S7 | 0.5~4.5VDC | |||||
S4 | 0~10mADC | S8 | RS485 | |||||
Code | Pressure Type | |||||||
G | Gauge Pressure | |||||||
A | Absolute Pressure | |||||||
S | Sealed Reference Pressure | |||||||
Code | Material | |||||||
01 | 304 Stainless Steel | |||||||
02 | 316L Stainless Steel | |||||||
Code | Cable Material | |||||||
C1 | PE | |||||||
C2 | PU |
FAQ:
Q1:Are you manufactrade company?
A1:We are manufactrader with more than 29 years of experience.
Q2:Customized Product
A2:We provide OEM and Custom-Design services.
Q3:Quality Quarantee
A3:Our products have a limited 12 to 18 months warranty from shipment date to the original purchaser.Hengtong will replace or repair defective products free of charge.This warranty does not apply to any units have been modified,misused,neglected.
Q4:Shipment&packing
A4:Products are generally shipped by international Express including UPS,FedEx,DHL and INT for freight prepaid,also can use your shipment account to collect,Standard export packing,including inspection certification.
Q5:Contact US
A5:We have an active and experienced sales team to serve you on technical question and business issue.Just leave us message or click the Online Service.