BP156 Pressure Transmitter
Introduction of pressure transmitter sensor:
BP156 pressure transmitter is designed for air compressor and refrigeration equipment to develop cost-effective products.It integrates the latest technology and is equipped with high performance PCB emission circuit developed by our company. Each product is rigorously aged and tested, with an independent inspection report.
Product Features of pressure transmitter sensor:
1. Wide measuring range, stainless steel structure, diverse pressure interface forms
2. Compact and lightweight design
Applications of pressure transmitter sensor:
1. Pressure measurement of non-corrosive gases and liquids with 316L stainless steel
2. Applied in the marine and aviation industries
3. Used in industrial on-site processes such as petroleum, chemical, metallurgy, power generation, and hydrology
4. Utilized in hydraulic and pneumatic control systems
Performance Parameters of pressure transmitter sensor: | |
Measurement Range | 0kPa ~ 10kPa…20MPa |
Pressure Type | Gauge Pressure, Absolute Pressure, Sealed Pressure |
Overload | ≤ 1.5 times of the rated range |
Accuracy @ 25ºC | ±0.25% (Typical) ±0.5% (Maximum) |
Repeatability& Hysteresis | 0.02%F.S(Typ.) 0.05%F.S(Max.) |
Long-Term Stability | ±0.1%F.S/Year(Typ.) ±0.2%F.S/Year(Max.) |
Zero Point Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
Full Scale Temperature Drift | ±0.02%F.S/ºC(≤100KPa) ±0.01%F.S/ºC(>100KPa) |
Frequency Response | 2.4Khz |
Compensation Temperature | 0-70ºC(≤10mpa,customizable) |
Operating Temperature | -20ºC~80ºC |
Storage Temperature | -40ºC~120ºC |
Vibration | 10g,55Hz ~ 2kHz |
Housing Material | 304,316L |
Diaphragm Material | 316L |
Insulation Resistance | 100MΩ 100VDC |
Protection Rating | IP65 |
Weight | ~0.25kg |
Output Signal | Supply Voltage | Output Type |
4~20mA | 12~30VDC | 2/3/4 wire |
0~10/20mA | 3 wire | |
0/1~5V | ||
0/1~10V | ||
0.5~4.5V | 5VDC |
Selection Examples |
Ordering tips |
1. When selecting the product, please ensure that the tested medium is compatible with the contact part of the product.
2. When placing an order, please note that explosion-proof products do not include digital display heads.
3. To ensure the reliable operation of the product, you are advised to install lightning protection devices on site and ensure that the product and power supply are grounded reliably.
4. The rated operating temperature range of fluorine rubber O-ring is -20℃~ 250℃. When the operating temperature of the product is lower than -20 ° C, EPDM O-type sealing ring should be selected.
5. The pressure transmitter cable is polyvinyl chloride, the default length of the liquid level cable is 1.5m, and there are three materials to choose from. If there are no special instructions, polyethylene cable materials can be used. If you need a different cable material, please specify it in the order form.
6. In case of special requirements such as strong vibration, instantaneous impact force, strong electromagnetic or RF interference, please inform us and indicate in the order.
Order Guide of pressure transmitter sensor | |||||||||
BP15X | Analog Pressure Transmitter | ||||||||
Code | Outline Construction | ||||||||
5 | Packard plug | 6 | Sealed Direct Output Cable 1.5 meters | ||||||
7 | Mini Hirschmann Connector | 8 | Large Hirschmann Connector | ||||||
Measurement Range | 0kPa ~ 10kPa…5MPa | ||||||||
(0-X)Kpa or MPa | X: Indicates the Actual Measuring Range | ||||||||
Code | Power Supply | ||||||||
D1 | 24VDC | ||||||||
D2 | 5VDC | ||||||||
D3 | Other | ||||||||
Code | Output Signal | ||||||||
S1 | 4~20mADC | S5 | 0~20mADC | ||||||
S2 | 1~5VDC | S6 | 0~10VDC | ||||||
S3 | 0~5VDC | S7 | 0.5~4.5VDC | ||||||
S4 | 0~10mADC | ||||||||
Code | Pressure Connection | ||||||||
J1 | M20×1.5 | ||||||||
J2 | G1/2 | ||||||||
J3 | G1/4 | ||||||||
J4 | 7/16-20UNF | ||||||||
J5 | Others(¢50.4 Flange) | ||||||||
Code | Electrical Connection | ||||||||
B1 | Hirschmann | ||||||||
B2 | PG7 | ||||||||
B3 | Cable Sealed Outlet 1.5 meters | ||||||||
B4 | Other | ||||||||
Code | Pressure Type | ||||||||
G | Gauge Pressure | ||||||||
A | Absolute Pressure | ||||||||
S | Sealed Reference Pressure |