Low Noise Two Stage Screw Compressor With Air Inlet Control System

1. High quality of airend

• The rotor adopts advanced high-efficiency molded lines, which ensures stability and high-efficiency;
• It adopts two-stage independent compression, same pressure ratio, low speed design, thus enhancing more than 15% of air volume under the same power;
• Guarantee of low compression ratio at every state, smaller host engine leakage, higher volume efficiency;
• It adopts oil mist spray cooling at stage intervals, so as to make the entire compression process close to isothermal compression, thus improving the compression adiabatic efficiency;
• The two segment rotors are directly driven by bevel wheel, so that each rotor obtain the best line speed, and the compression transfer efficiency is the highest;
• The rotor and bearing have small load, the constant operation of host engine ensures long life;

2. Highly efficient cooling system

It adopts highly efficient fin-type cooler with large heat exchange area, surplus of heat exchange being 30% and more optimal cooling effect, and it can normally operate under environmental temperature 45°C.

3. Energy-saving air inlet control system

New-type integrated inlet valve of professional design with large range of air inlet adjustment . It has valve regulation with small pressure loss, stable movement and long service life. Key part of inlet valve—magnetic valve uses internationally famous brand, which guarantees absolute operating safety and

4. Intelligent microcomputer control system

This system is of simple operation, it can realize Chinese/English and complex font switching with air filter/oil filter/oil fine separator/lubricating oil, it uses intelligent time monitoring and management, it even has remote monitoring function to be chosen by the user.

5. IOT PLC infinite extension module

Permanent magnet frequency characteristics

1. 24-hour warning sending of the system

The warning systems of maintenance and breakdown are triggered as soon as maintenances are needed or breakdowns happen.then the equipment management members and the mainrenance members of the distributors will be informed at the soonest time through the way of message or email,through which,both the secondary loss and the major breakdowns of the machinery can be avoided.

2. The easy and quick operation method

The operation mode of ^ueasy managemenf with a touch screen makes it easy and quick to revise parameters.Meanwhile.in order to turn the intelligent network control to be reality,intelligent power-on and power-off or pressure setting within certain periods can be set.

3. A real time check on the operational parameters and breakdown warnings of the machines can be achieved through the remote monitoring system.

4. The breakdowns under moving cirumstances can be dealt with timely and quickly.

5. Based on being human-oriented and taking services as the top priority,the APP terminal systems can provide convenient and efficient control and use conditions and then provide safe,reliable and considerate services to pepole through firstly performing a good management at anywhere and anytime.

Two-stage energy-saving screw compressor-technical parameters

Two-stage energy-saving screw compressor-technical parameters

FAQ:
1. Before quoting, what should users offer?
1). Discharge pressure (Bar, Mpa or Psi)
2). Air discharge/Air flow/Air capacity (m3/min or CFM)
3). Power supply (220/380V, 50/60Hz, 3Phase)
2. If I don't know the pressure and air flow, what should I do?
1). Take the picture of nameplate, we will advise the suitable air compressor to you.
2).T ell us what industry you are, we can advise the suitable one (so as to air tank / air dryer / air filters).