Energy Saving Two Stage Air Compressor , Oil Lubricated Air Compressor

1. High quality of airend

• The rotor adopts advanced high-efficiency molded lines, which ensures stability and high-efficiency;
• It adopts two-stage independent compression, same pressure ratio, low speed design, thus enhancing more than 15% of air volume under the same power;
• Guarantee of low compression ratio at every state, smaller host engine leakage, higher volume efficiency;
• It adopts oil mist spray cooling at stage intervals, so as to make the entire compression process close to isothermal compression, thus improving the compression adiabatic efficiency;
• The two segment rotors are directly driven by bevel wheel, so that each rotor obtain the best line speed, and the compression transfer efficiency is the highest;
• The rotor and bearing have small load, the constant operation of host engine ensures long life;

2. Highly efficiency and energy-saving screw airend

The air end is connected with big rotator and is designed with low rotat-ing speed, and it contains two independent compression units. It is featured by high efficiency, low noise, low vibration, high reliability, low compression ratio in each stage, smaller leakage and high volume efficiency. Under the same power, two heads bear load while bearings bear small load with longer service life.

Permanent magnet frequency characteristics

1. 24-hour warning sending of the system

The warning systems of maintenance and breakdown are triggered as soon as maintenances are needed or breakdowns happen.then the equipment management members and the mainrenance members of the distributors will be informed at the soonest time through the way of message or email,through which,both the secondary loss and the major breakdowns of the machinery can be avoided.

2. The easy and quick operation method

The operation mode of ^ueasy managemenf with a touch screen makes it easy and quick to revise parameters.Meanwhile.in order to turn the intelligent network control to be reality,intelligent power-on and power-off or pressure setting within certain periods can be set.

3. A real time check on the operational parameters and breakdown warnings of the machines can be achieved through the remote monitoring system.

4. The breakdowns under moving cirumstances can be dealt with timely and quickly.

5. Based on being human-oriented and taking services as the top priority,the APP terminal systems can provide convenient and efficient control and use conditions and then provide safe,reliable and considerate services to pepole through firstly performing a good management at anywhere and anytime.

Energy saving Mute environmental

1. The big data information-based management system

Master all kinds of information,use information,have a trial use of the information as well as find out the problems and breakdowns etc. at anywhere and anytime,and them provide the most valuable.timely and improrant information and finally improve various effciencies.

2. Save as much as 50% electricity

When the demand for air changes drainatically, the average energy saving rate is over 50%. There is no waster of idling and unloading, no peak start current, so that reduce the energy consumption of air compressor.

protection Subversion tradition Lead the future

• The extremely efficient and synchronic motors
• Its efficient turnning frequency with a broad range makes gaining much more energy-saving operation space possible.
• With the same power, in contrast with the air displacement produced by the single-stage compressors,an extra 15% of air displacement will be produced by the two-stage compressors.

Two-stage energy-saving screw compressor-technical parameters

Company profile:

Wan Beardsley Compression Machine (Shanghai) Co., Ltd is a medium and large-sized enterprise specialized in research, development and production of air compressors. By virtue of fruitful technological strength and advanced and complete production and testing equipments, this company pursues enterprise tenet “Achieve high quality with conscientiousness and create a centennial brand with quality”, strictly performs the commitment “be the most energy-efficient screw air compressor”, continuously seeks for sustainable improvement of products, process and system, and increasingly improves product properties, quality and reliability so as to make out R & D and manufacturing capacity step onto a new stair in manufacturing technology of air compressor. Our product quality has reached internally first-class level, and some products have been exported to and supported Southeast Asia and European and American markets.