ABB CI853 RS-232 module S800 I/O COMLI and MODBUS RTU CI853K01 3BSE018103R1
Communications
Model No. | Protocol | Master or slave |
CI801 | PROFIBUS DP-V1 | Slave |
CI840A | PROFIBUS DP-V1 | Slave |
CI853 | COMLI and MODBUS RTU | Master / Slave |
CI854B | PROFIBUS DP-V1 | Master |
CI855 | ABB's MasterBus 300 | Master |
CI856 | ABB's S100 I/O | Master |
CI857 | ABB's INSUM | Master |
CI858 | ABB's DriveBus | Master |
CI860 | FOUNDATION Fieldbus HSE | Master / Slave |
CI865 | ABB's Satt I/O | Master |
CI867 | MODBUS TCP | Master / Slave |
CI868 | IEC 61850 | Master / Slave |
CI869 | ABB's Advant Fieldbus 100 | Slave |
CI871 | PROFINET IO | Master |
CI873 | EtherNet IP / DeviceNet | Master |
TB820V2 | ABB's Modulebus | Slave |
TB825 (Multi Mode) | ABB's Modulebus | Slave |
TB826 (Single Mode) | ABB's Modulebus | Slave |
TB840A | ABB's Modulebus | Slave |
TB842 | ABB's Modulebus | Not Applicable |
TU807 | ABB's Modulebus | Not Applicable |
TU840 | ABB's Modulebus | Not Applicable |
TU841 | ABB's Modulebus | Not Applicable |
TU846 | ABB's Modulebus | Not Applicable |
TU847 | ABB's Modulebus | Not Applicable |
TU848 | ABB's Modulebus | Not Applicable |
TU849 | ABB's Modulebus | Not Applicable |
Description of CI853K01
CI853 RS-232 module protocols:
COMLI can be used on the build in COM3 port and optionally on the CI853 ports. The cable length can be extended considerably (to several km) using a fiber optic converter. RS-232C is the standard communication interface used for serial communication with COMLI. The CI853 supports Hot Swap. COMLI is an ABB protocol for data transmission between controllers. It is designed for asynchronous master/slave communication in half-duplex. COMLI protocol supports dial-up modem controlled from the application. CI853 supports both Master/Slave mode in COMLI.
MODBUS RTU is a standard protocol widely spread because of its ease of use and reliability. Modbus RTU is an open, serial (RS-232 or RS-485) protocol derived from the Master/Slave architecture exchanging information in half duplex mode. The Modbus functionality can be configured both on the COM ports of AC 800M and CI853. Module Redundancy is not available in MODBUS RTU. CI853 supports only Master mode in MODBUS RTU.
General Information
Protocol | COMLI and MODBUS RTU |
Article number | 3BSE018103R1 (CI853K01) |
Master or slave | Master / Slave |
Number of channels | 2 |
Transmission speed | 75 - 19 200 b/s |
Line redundancy | Yes |
Module redundancy | Yes |
Hot Swap | Yes |
Used together with HI Controller | Yes |
Detailed data
Max units on CEX bus | 12 |
Connector | RJ-45 female (8-pin) |
24 V consumption typ. | 100 mA |
Environmental and certification
Temperature, Operating | +5 to +55 °C (+41 to +131 °F) |
Temperature, Storage | -40 to +70 °C (-40 to +158 °F) |
Protection class | IP20 according to EN60529, IEC 529 |
CE- marking | Yes |
Marine certificates | ABS, BV, DNV-GL, LR, RS, CCS |
RoHS compliance | EN 50581:2012 |
WEEE compliance | DIRECTIVE/2012/19/EU |
Features and benefits
Dimensions
Height | 185 mm (7.3 in.) |
Width | 59 mm (2.3 in.) |
Depth | 127.5 mm (5.0 in.) |
Weight (including base) | 700 g (1.5 lbs) |
Some ABB items sold by WTL:
WTL is not liable for any personal injury or property damage resulting from the use of this equipment. It is
buyer's responsibility as to the safe handling & operation of this equipment and to verify equipment is
compliance to their machinery.
Our Brands:
【Honeywell】 | Module DCS/PLC/Transmitter |
【Emerson/Delta V】 | Module/ CT Motor & Drives |
【ABB】 | I/O Module |
【AB】 | Module&Touch Screen |
【Rosemount】 | Transmitter |
【Yokogawa】 | Transmitter |
【Yaskawa】 | Servo Drive&Servo Motor |
【GE/Fanuc】 | IC69 Series PLC |
【Mitsubishi】 | Servo Drive&Servo Motor |
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)