HMI Touch Screen AB Allen Bradley PLUS 1000 2711-B6C8L1 PanelView Rev A FRN 4.44 24V

2711-B6C8L1 PARAMETER

The discontinued Allen Bradley Panelview 600 2711-B6C8L1 is an operator terminal that enables the user to interface with their machine.
This HMI has a 5 in. Color Display. This Panelview allows the user to connect using Panelbuilder 32 software and a DH+ and RS-232 Printer communication port with a 2711-NC14 communication cable(s).
The user is able to control the HMI using the Keypad/Touchscreen to input information and data. This unit is powered using 18-32 VDC power.
This unit has the following internal memory: 240 KB. If applicable this unit has an internal backlight replacement part number of 2711-NL5. The approximate shipping weight and dimensions are 6 lbs. and 14 x 11 x 8 in. The most common Series are: A, B, C, D, E, F, G, H, I, J, K, and L and the most common firmware include 1.00-4.48.
The Data Highway Plus terminals are capable of point-to-point communication with a single controller, as well as network communication with multiple controllers over an Allen-Bradley DH+ network. Direct access to controller data files minimizes ladder logic. Application files are easily downloaded or uploaded using PanelBuilder32 over the DH+ network, or directly via the on-board RS-232 printer port, or with a PC memory card. Application files are easily downloaded or uploaded using PanelBuilder32 over the DH + network or directly via the on-board RS-232 printer port. The PC memory card interface can also be used.


QUICK DETAILS

1. Brand :Allen Bradley (AB)
2. Model : 2711P-T10C4D8
3. Place of Origin : USA

DESCRIPTION

• Touch Display Screen
• MONITOR
• PanelView

SPECIFITIONS

Important User Information

Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelinesfor the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your localRockwell Automation sales office or online at http://literature.rockwellautomation.com) describes some important differences between solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of thewide variety of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselvesthat each intended application of this equipment is acceptable.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use orapplication of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables andrequirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liabilityfor actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, orsoftware described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., isprohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.







SIMILAR PRODUCTS

OTHER SUPERIOR PRODUCTS