1PC New Yaskawa Serrvo Motor 1300W 200V 10.7A SGMG-13ASACB Made in Japan
Specifications
Current: 10.7A
Volatge: 200V
Power :1300W
Max speed: 1300rpm
Encoder: 17bit Absolute encoder
Load Inertia JL kg¡m2¢ 10−4: 0.026
Shaft: straight without key
SGMG-03A2B |
SGMG-03V2BBB |
SGMG-05A2A |
SGMG-05A2AB |
SGMG-05A2AB+SGDB-05ADG |
SGMG-05A2ABB |
SGMG-05A2ABC |
SGMG-05A2ABS |
SGMG-05A2AC |
SGMG-05A2ASCRB |
SGMG-06A2BB |
SGMG-06A2BBB |
SGMG-06ASBAB |
SGMG-06V2BBB |
SGMG-08K3A-CA11 |
SGMG-09A2A |
SGMG-09A2AAB |
SGMG-09A2AB |
SGMG-09A2ABB |
SGMG-09A2ABC |
SGMG-09A2ABS |
SGMG-09A2BSAR |
SGMG-09ASA |
SGMG-12A2B |
SGMG-13A2A |
SGMG-13A2AAB |
SGMG-13A2AAC |
SGMG-13A2AB |
SGMG-13A2ABC |
SGMG-13A2ABS |
SGMG-13A2AC |
SGMG-13ASA |
SGMG-13ASAB |
SGMG-13ASAB +SGDB-15ADG |
SGMG-13AWA |
SGMG-13AWA-YR13 |
SGMG-1AA2AB |
SGMG-1AA2ABC |
SGMG-1EA2AB |
General Safety: Do not use a HV supply rated at high currents! (0.1mA or so would already be quite high at that voltage). A low-current supply can build up a lethal charge over time when connected to a large HV capacitor. Thus, do not employ any high-voltage capacitors with more than a few nF (nano-Farad) of capacitance. If you carry any medical electronics you should not be near any HV device. Keep computers, cell phones and other electro-statically sensitive equipment away from HV devices.
Safe operation of this device: Make sure the HV side of your circuit has a well-defined grounding. Do not touch the wiring while the HV supply is turned on. To disengage the motor, turn the HV supply off. Before touching any of its parts, short the motor panels and all capacitors with a sufficiently well insulated wire. Mount the axle of the motor in a way that it is safe to touch it while the HV is on.
I do not guarantee the safety of the described device or any of its parts. Building and operating it is at your own risk.
OTHER SUPERIOR PRODUCTS