GE FANUC IC693MDL310 , AC Output Module , Series 90-30 , 120 Volts AC

Product Description

IC693MDL310 is a 120-volt, 0.5 Amp AC output module that offers 12 output points in two separate classes. The two classes have six points each. Each class has an isolated common which is not knotted together within the module. This is important since it permits each class to be used in different stages of AC supply. A 3 Amps fuse is used to safeguard every class. An RC snubber is offered to every output to safeguard against transient electrical noise coming from the power line. IC693MDL310 delivers a high degree of inrush current that enhances the outputs ability to control many inductive and incandescent loads. The AC power to run operations linked to output should be supplied from the user.

There are LED indicators located at the top of the module which indicates the on/off condition of every point. The module makes use of the first 6 LEDs listed as B1 through 6 in the bottom row for output status. The IC693MDL310 is also regarded as a 16-point output for output 1 to 6 and 9 to 14. The module consists of an insert between the inside and outside surface of the hinged door. The module has an output voltage range of 85 to 132 voltages AC. Its output current is 0.5 Amps per point. The inrush least load current is 5 Amps highest for a single cycle. The module also has an output leakage current of 3 mA maximum at 120 volts AC. The power consumed by the module is 210 mA from 5 volts bus on the backplane. Furthermore, it has an isolation of 500 volts between every class.

About IC693MDL310

The GE Fanuc IC693MDL310 module is an output module with 12 output points grouped in 2 groups of of 6 points each. This module is manufactured as part of the GE Fanuc Series 90-30 PLC product line with an operating voltage rating of 120 Volts AC and a current rating of 0.5 Amps. Each of the 2 groups has an isolated common which is secured inside the module. It allows for each type to be used in various stages of the power supply's operation. The IC693MDL310 module comes with a fuse rated at 3 Amps that safeguards each group. Every output comes with an RC snubber to offer protection against transient electrical noise from the power line. It offers a high-level inrush current that increases the output's ability to control different incandescent and inductive loads.

The users of the IC693MDL310 output module must provide the AC power to run operations linked to the outputs. Other features of the IC693MDL310 module include LED indicators that are found on the top side of the module and show the "ON" and "OFF" status of each output point. It utilizes the first 6 LEDs labeled B1 to B6 on the bottom row for the output status. It also has an insert in the middle of the inner and outer surface of the hinged door. This module features an output voltage ranging from 85 to 132 Volts AC, with a current rating of 0.5 Amps per point. It also has an inrush load current of 5 Amps for one cycle. It also comes with a module and has an output current leakage of 3 milliamps at a maximum of 120 Volts AC.

Technical Specifications

Technical Information