MachineU > China Products > Electrical Equipment & Supplies > Industrial Controls > PLC PAC And Dedicated Controllers
Ge Fanuc IC660BBD101 ， Low Leakage Input/Output Block ， 115 Volt AC
Ge Fanuc IC660BBD101 ， Low Leakage Input/Output Block ， 115 Volt AC
Ge Fanuc IC660BBD101 ， Low Leakage Input/Output Block ， 115 Volt AC
Ge Fanuc IC660BBD101 ， Low Leakage Input/Output Block ， 115 Volt AC
Specifications
Brand Name :
GE
Model Number :
IC660BBD101
Place of Origin :
USA
MOQ :
1
Price :
negotiable
Payment Terms :
T/T
Supply Ability :
100
Delivery Time :
5-8 work days
Packaging Details :
New in original box
Brand :
GE Fanuc
Model :
IC660BBD101
Series :
Genius I/O
Product Type :
I/O Block
Voltage Rating :
115 Volts AC
Channels :
8
Input Processing Time :
2 milliseconds plus filter
Selectable Filter Delay :
10 to 100 milliseconds
Maximum Inrush Current at up to 2 Cycles :
25 Amps
warranty :
1 year
Description

Ge Fanuc IC660BBD101 , Low Leakage Input/Output Block , 115 Volt AC

Product Description

IC660BBD101 is a GE Fanuc Low Leakage Input/Output Block that comes with eight discrete points/circuits and delivers 115 Volts AC. The input, as well the as operating voltage range, is between 93-132 Volts AC with a load current of 2 Amps. Each of its eight circuits can be configured for either input or output. The I/O block links multiple discrete sensors/actuators and a communication bus. The block can accommodate high input impedance. A fuse shuts down output current in the circuit if it goes beyond 30 Amps or 20 Amps for every two cycles. The circuit can later be restored by issuing a command from the CPU or a handheld monitor.

The I/O block comes with features such as input filters with selectable filter times ranging from 10ms -100ms, module control for bus switching, output feedback for voltage monitoring, pulse testing for output points, and defaults for output power-up. The IC660BBD101 block comes equipped with salient diagnostics such as voltage overload detection, power-off, and no-load detection.

LED indicators on the I/O block blink to alert the user to errors or faults such as faulty cabling, incorrect baud rate, and improper grounding among others. There is a dedicated LED for each circuit. For an output circuit, an LED, which in ON indicates that a specific circuit has complied with the command issued by the CPU. For an input circuit, however, an ON LED shows that a specific terminal has reached the threshold voltage. Error messages are generated on the handheld monitor, which helps the user attend to the fault promptly and efficiently.

The IC660BBD101 I/O block weighs 4lbs and works with model IC660HHM501 of the handheld monitor and IC693BEM331 bus controller model. During block mounting, the I/O block should be installed in a protective enclosure, which is clean and devoid of any contaminants. Furthermore, there should be adequate cooling space for the block. Mounting can be done right-side up or upside down.


Technical Specifications

Rated Voltage: 115 volt AC
# of Points: 8
Input Range: 93-132 VAC
Load Current: 2 Amps
Operating Voltage: 93-132 VAC
Points per Common: One group of 8

Technical Information

Specifications

Blocktype: CatalogNumbers:

Block: TerminalAssemblyonly: ElectronicsAssemblyonly:

8 circuit combination input and output

IC660BBD101 IC660TSD100 IC660EBD101

Size (height x width x depth):

Weight:

LED’s (I/O block): LED’s (each circuit):

Block to Block Isolation: HeatDissipation:

8.83” (22.44cm) x 3.50” (8.89cm) x 3.94” (10.00cm)

4 lbs. (1.8 kg)

UnitOK,I / OEnabled On logic side of switch 1500 V

16W maximum with 8 inputs

43.5W maximum with 8 outputs on at 2 amps.

Standbypower (all inputs and outputs off): Operatingvoltage(singlesource): Frequency:

Power supplydropouttime:

8.5 Watts 93–132 VAC 47–63 Hz

1 cycle (16.7mS at 60Hz, 20mS at 50Hz)

InputCharacteristics:

Non–tristate input, OFF state:

Minimum voltage across input device (IN to H) Maximum leakage through input device

Non–tristate input, ON state:

Maximum voltage across input device (IN to H) Maximum switch current threshold

Tristate input, OFF state:

Acceptable voltage across input device (IN to H) Tristate input, ON state:

Maximum voltage across input device (IN to H) Input load network:

Resistor to N Capacitor to H

Input processing time (typical) Selectable input filter times Inputdiagnostics

60 VRMS
1.5 mA
20 VRMS
6 mA RMS
16 VRMS–40 VRMS
4 VRMS
13K ohms
.10 f
2mS + filter
10 to 100mS in 10mS increments
Open Wire, Overtemperature, Failed Switch

OutputCharacteristics:

Circuit output current (steady state) Maximum inrush current up to 2 cycles Maximum inrush current 2–6 cycles Maximum block output current

Output Leakage @ 115 VAC:

Current at 0 volt output (OUT to N) Voltage at open output (OUT to N) Output switch (OFF to ON / ON to OFF)

Maximumswitching frequency Turn–on delay (maximum) Voltage drop (at 2 amps)

Voltage drop (at 30 amps inrush)

Recommended min. load, resistive (No Load disabled): Recommended min. load, inductive (No Load dis-

abled):

No Load enabled threshold Fusing

Outputdiagnostics

2 amps RMS
25 amps peak
14 amps peak
15 amps at 35C, 7.5 amps at 60C
< 7mA
65 volts
Zerocrossing
Once per second (high inrush currents)
0.5 Hz + 1mS
2.5 volts
10 volts
25mA
40mA
50mA
Internal electronic short circuit trip. 100ms long time trip
Short Circuit, Overload, No Load, Failed Switch, Overtemperature

Environmental: Operating Temperature Storage Temperature Humidity

Vibration

0 to +60 C (32 to +140 F)
–40 to +100 C (–40 to +212 F)
5% to 95% (non–condensing)
5–10 Hz 0.2” (5.08mm) displacement, 10–200 Hz at 1G


Ge Fanuc IC660BBD101 ， Low Leakage Input/Output Block ， 115 Volt AC

Ge Fanuc IC660BBD101 ， Low Leakage Input/Output Block ， 115 Volt AC

Product tags

freon r410a pret

,

hfc134a vs r134a freon

,

freon hfc134a
Send your message to this supplier
Send Now

Ge Fanuc IC660BBD101 ， Low Leakage Input/Output Block ， 115 Volt AC

Ask Latest Price
Product Detail
Brand Name :
GE
Model Number :
IC660BBD101
Place of Origin :
USA
MOQ :
1
Price :
negotiable
Payment Terms :
T/T
Contact Supplier
Ge Fanuc IC660BBD101 ， Low Leakage Input/Output Block ， 115 Volt AC
Ge Fanuc IC660BBD101 ， Low Leakage Input/Output Block ， 115 Volt AC

Shenzhen Wisdomlong Technology CO.,LTD

Verified Supplier
8 Years
guangdong, shenzhen
Since 2010
Business Type :
Importer, Exporter, Trading Company, Seller
Main Products :
Industrial Servo Motor, Industrial Servo Drives, AC Servo Amplifier
Total Annual :
1000000-5000000
Employee Number :
100~120
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Digital I O Module
MachineU China Products Electrical Equipment & Supplies Industrial Controls PLC PAC And Dedicated Controllers
Contact Supplier
Submit Requirement