Ge Fanuc IC660TBD120 , Genius Terminal Assembly Produced

93 To 132 Volts AC And 10 To 30 Volts DC

Technical Information

The IC660TBD120 terminal block is a terminal block for the Genius I/O high speed counter block. This counter block is used to process signals of up to 200 KHz for industrial purposes. It is mostly used with velocity measurement, material handling, motion control, and turbine flowmeter applications. The counter has 12 inputs and 4 outputs and a 5 Volts DC output voltage from a source that is attached with an oscillator output. The block is an intelligent device with failed switch diagnostics and other diagnostics features. It can be configured by using software and it offers built-in protection against power surges at the output. The IC660TBD120 terminal block allows an external battery option for backup purposes. The front section of the block has a monitoring programmer terminal that aids in the connection of handheld devices.

The frequency of the IC660TBD120 terminal block is 50/60 Hertz and it runs with a voltage rating of 12/24 Volts DC or 115 Volts AC. There are counter inputs and counter outputs on the front side of the terminal. The terminal comes with an input impedance rating of 4 kiloohms. The count rate of the terminal is 200 KHz maximum if it is selected with a high-frequency filter, and 40 Hertz maximum when a low frequency filter is selected. The environmental temperature should be set between 0 and 60 degrees Celsius for normal operation. The LED terminal on the block shows the operating status of the application, the CPU communication, the circuit faults, the bus scans, the terminal assembly mismatches, and if there is no CPU communications. The IC660TBD120 terminal block is used with a load current rating of 200 milliamps. The terminal should be grounded during the installation.

About IC660TBD120

Technical Specifications for IC660TBD120