Specifications
Brand Name :
GE
Model Number :
IC697BEM733
Place of Origin :
USA
MOQ :
1
Price :
negotiable
Payment Terms :
T/T
Supply Ability :
100
Delivery Time :
5-8 work days
Packaging Details :
New in original box
Certification :
dose not supply
Brand :
GE Fanuc
Model :
IC697BEM733
Series :
Series 90-70
Product Type :
Genius Remote I/O Scanner
Location in PLCs :
Rack 0, slot 1
Number of Racks to Scan :
8
Serial Ports :
2
Communication with PLCs :
IC66 Serial Communication Bus
Description

GE FANUC IC697BEM733 , Genius Remote I/O Scanner , 90-70 Series

Remote I/O Scanner

Product Description



IC697BEM733 is a Genius Remote I/O Scanner for the GE 90-70 Series that mounts in a remote IC697 rack and interfaces IC697 I/O modules to an IC66* bus. Features include a location distance of 7500 feet or 2275 meters from the controller. It supports both discrete and analog I/O modules as well as PCM, ADS, and analog expander modules. The IC697BEM733 can handle up to 128 input/output bytes per remote drop (comprised of a remote I/O scanner and the corresponding modules). A remote drop can include a maximum of eight racks, which are linked by a bus transmitter and a bus receiver. Racks with 9 or 5 slots are appropriate. The distance from the first rack to the last in a remote drop is no more than 50 feet or 15 meters.

The IC697BEM733 scanner can accommodate numerous combinations of discrete and analog inputs and outputs regardless of the number of racks in the drop. A remote drop can include all available IC697 discrete modules, analog modules, and analog expander modules. Bus Transmitter, Bus Receiver, PCM, and ADS modules can also be located in a remote drop. It is important to note, however, that a remote drop cannot have any I/O module interrupts, bus controllers, communications modules, or other modules dependent upon COMREQ instructions. The IC697BEM733 is designed for use in an IC697 PLC system, but any type of PLC or computer able to control an IC66* bus can function as host. Other possible hosts include IC660 PLCs, IC655 PLCs, and computers equipped with a PCIM, QBIM, or a third-party GENI-based interface.

Technical Specifications


Module Type: Remote I/O Scanner
Eff. Data Rate: 38.4 Kbaud
Max Distance from Controller: 7500 feet
Discrete Points Available: 128 bytes per drop
Serial Ports: 2
Current Required: 0.8 Amp

Technical Information

Specifications

ModuleType

IC697RemoteI / OScannerI,C697BEM733 / 735

Module OK, I / O Enabled, Bus B Active

Occupies single slot in IC697 remote rack

One 15-pin RS-422 / 485 compatibleserial port,

one 9-pin IC66* Hand-held Monitor port.

0.8 amps

Daisy-chained bus cable; single twisted pair plus shield or Twinax. Fi- ber optics cable and modems can also be used.

75, 100, 120, or 150 ohm resistor at both ends of electrical bus cable.

Configurable. 153.6 Kbaud standard, 153.6 Kbaud extended,76.8 Kbaud, or 38.4 Kbaud.

7500 feet (2275 meters) at 38.4 Kbaud, 4500 feet (1365 meters) at 76.8

Kbaud, 3500 feet (1060 meters) at 153.6 Kbaud extended, 2000 feet 605 meters) at 153.6 Kbaud, standard. Maximum length at each baud rate also depends on cable type. The IC66* I/O System User’sManual provides a complete list of cable types, showing correspondingbus lengths and baud rates.

32 devices at 153.6 Kbaud standard, 153.6 Kbaud extended, or 76.8 Kbaud. 16 devices at 38.4 Kbaud. Includes bus controller and Hand- held Monitor.

Depends on baud rate as follows:

Up to 20 fully-loaded drops, or up to 30 drops if not fully-loaded. Up to 20 fully-loaded drops, or up to 30 drops if not fully-loaded. Up to 10 fully-loaded drops, or up to 30 drops if not fully-loaded.

LEDs
Size
Ports
Current Required from +5V Bus
Bus Type
Bus Termination
BaudRate
MaximumBusLength

Maximum Number of Devicesper Bus

Maximum Number of RemoteDrops per Bus
153.6Kbaudextended
153.6Kbaudextended
76.8Kbaud

GE FANUC IC697BEM733 , Genius Remote I/O Scanner ,  90-70 Series Remote I/O Scanner

Description:
The IC697BEM733 is a Remote I/O scanner module that is part of the Series 90-70 Programmable Logic Controller (PAC) series formerly manufactured by GE Fanuc Automation, now under Emerson Automation. This module is a Remote I/O scanner that is provided with One 15-pin RS-422/485 compatible serial port, and One (1) 9-pin IC66* Hand-held Monitor port. It also has an IC66* Bus terminal for bus communication. This module supports installation 7500 feet (2275 meters) away from the controller and handles 128 Bytes of input and output per Remote I/O drop.

GE FANUC IC697BEM733 , Genius Remote I/O Scanner ,  90-70 Series Remote I/O Scanner

GE FANUC IC697BEM733 , Genius Remote I/O Scanner ,  90-70 Series Remote I/O Scanner


Send your message to this supplier
Send Now

GE FANUC IC697BEM733 , Genius Remote I/O Scanner , 90-70 Series Remote I/O Scanner

Ask Latest Price
Brand Name :
GE
Model Number :
IC697BEM733
Place of Origin :
USA
MOQ :
1
Price :
negotiable
Payment Terms :
T/T
Contact Supplier
GE FANUC IC697BEM733 , Genius Remote I/O Scanner ,  90-70 Series Remote I/O Scanner
GE FANUC IC697BEM733 , Genius Remote I/O Scanner ,  90-70 Series Remote I/O Scanner
GE FANUC IC697BEM733 , Genius Remote I/O Scanner ,  90-70 Series Remote I/O Scanner

Shenzhen Wisdomlong Technology CO.,LTD

Verified Supplier
8 Years
guangdong, shenzhen
Since 2010
Business Type :
Importer, Exporter, Trading Company, Seller
Total Annual :
1000000-5000000
Employee Number :
100~120
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement