Vacuum sintering degreasing integrated furnace

Vacuum sintering debinding furnace Vacuum Debinding and Sintering Furnace (SiC/Si3N4/AlN) , Vacuum debinding furnace

Suitable for degreasing of cemented carbide, high-density alloy, stainless steel products, high-temperature alloy, magnetic material, ceramic powder products, carbide, etc.

Product features

1. The furnace body is a horizontal single-chamber water-cooled jacket structure, and the furnace door adopts a sandwich water-cooled jacket structure. The outer layer is ordinary steel plate, and the inner layer is stainless steel. The flanges at both ends are welded to the cylinder and the furnace cover sandwich respectively. The double-door manual clamping structure is adopted for easy loading and unloading.

2. In order to improve the degree of automation control, the main valves on each pipeline of the vacuum system of this furnace are pneumatic valves, which are intuitive and convenient to operate.

3. The system is equipped with two glass rotor flowmeters to adjust the gas flow rate filled into the furnace respectively.

4. An electric contact pressure gauge is installed on the furnace body to monitor the pressure in the furnace. When the furnace is over-pressured, it can automatically release the pressure to ensure the safe operation of the system.

5. During the degreasing stage, a small amount of gas can be appropriately filled in according to the fat content of the product to achieve directional airflow degreasing.

6. The rapid cooling device consists of a motor, a fan impeller, a built-in radiator and a ventilation door on the heat insulation screen. The furnace is filled with inert gas Ar to quickly cool the workpiece.

After sales:
1.Installation, Commissioning And Acceptance
We do installation, commissioning and acceptance in buyer's plant.During the installation and commissioning period, the commissioning personnel shall be provided free of charge by the demander according to the staff standard.
The equipment shipped to the buyer, the seller received the buyer's notification, both within a week to carry the equipment out of the box together, then check the equipment and all components according to the packing list . Including equipment accessories, spare parts and special tools, attached manual and technical documents, etc. It can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted according to the technical accessories.
2.Training
When taking-over the Furnace to the customer, We will give a staff training to customer. The operating personnel of the customer should join to commission,test the furnace, when installing at customer’s company.
This is practical operation training and practical maintenance training,and our technical personnel will telling the basic principle,equipment maintenance knowledge,And the common fault handling measures.We can training 2 ~ 3 workers. ( Training how to maintenance and operating.)
3. Warranty period
The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.