ASME B16.9 2 inch ss 304 ss316 45 90 degree Stainless steel elbow

Description

Stainless steel elbow is a special raw material, which does not need to add pipe blank raw materials, so it is easy to control during processing.

Stainless steel elbow can save the cost of pipe making equipment and mold, and elbow with arbitrary large diameter and relatively thin wall thickness can be obtained.

Stainless steel elbow is made of flat plate or developable curved surface, so it has the advantages of simple blanking, easy accuracy assurance, convenient assembly and welding, easy control of raw materials during processing and simple operation.

Specification

Thickness: 3-20mm
Size: 1/2' ~ 8', DN15-200
Standard: DIN,ANSI,JIS etc
Material: 304 306 Stainless Steel
Nominal diameter: DN15-DN1200

Technical data sheet

ASME B16.9 2 inch ss 304 ss316 45 90 degree Stainless steel elbow​ technical data sheet as below:

Characteristic

1. Inner wall finish: the finish of the inner wall of the stainless steel elbow avoids the condensation of impurities and is the most ideal material in construction.

2. Excellent wear resistance: the stainless steel elbow can operate in the fluid environment of up to 20m / s and resist erosion.

3. Unique passivation effect: pH value in water, air, dissolved oxygen, impurities and water treatment agent can be the causes of pipe corrosion. Stainless steel pipe fittings have a thin and dense oxide film, which can react with oxidant and prevent further oxidation reaction.

Application

Stainless steel elbow is a pipe fitting used at the corner of pipeline. It is widely used in practical use. It is often used in construction, machinery, chemical industry, electric power, shipbuilding and other industries.

Product picture