GMC 4P Mini Mechanical Interlocking Home AC Contactor Gmc 9mr 9A 3 Phase Contactor

GMC:UKC1 Mechanical Interlocking Contactor is suitable for using in the circuit up to the rated voltage 660V AC 50Hz or 60Hz, current 800A, for convertible controlling the motor. Its mechanical interlocking device ensures contact changeover between the two convertible contactors.

Description:

Directly drive contactor by transistor output of PLC

The power consumption of the UKC1- low consumption type contactor is 1.2W.

This contactor can be driven by a transistor output of a PLC or electronic equipment such as photoelectric switch, or a proximity limit switch. Therefore, it is possible for this contactor to directly interface without interface relay for driving a 3-phase induction motor.

Low coil power consumption greatly expands application flexibility. Standard AC coils require 1.8 watts.

Specifications:

Coil voltage(AC):

24V,36V, 42V, 48V, 110V, 115V, 120V, 200V, 220V, 240V, 256V, 277V, 380V, 400V, 440V, 480V, 500V, 550V

Main application fields for dc mini contactors:

Lighting for out-door

Car washing facilities

Crain hoist

Lighting of sports facilities

Pump

Compressor

Vending machine

Painting machine

Show case

It is possible to expand the control wire length since voltage drop in wires is small.

Normal working conditions and installation conditions

1. Ambient temperature: It works within-5℃~+40℃, and the average temperature no more than

+35℃in 24 hours.

2. Altitude: No more than 2000m.

3. Atmosphere: Relative humidity no more than 50% at max.40 ℃, and it may be higher at a

lower temperature. The highest average temperature no more than 25℃ in the wettest month.

The maximum average relative humidity of this month doesn't exceed 90℃. The change

of temperature leading to dew on the product must be considered.

4. Mounting condition: The inclined angle between the mounting surface and the vertical surface

no more than 5°.