Specifications
Brand Name :
MENTEK
Certification :
CE
MOQ :
1 Unit
Price :
Negotiable
Payment Terms :
T/T
Supply Ability :
30 sets per month
Delivery Time :
25-30 Working days
Packaging Details :
strong plywood case
Description

10HP Specification -40~+80C Coolant Test System For New Energy Vehicle Battery Pack

Specification

Number

Item

Description

Coolant temperature
  1. ℃~+80℃,adjustable
Chiller size

D 1514×W 806×H 1768mm,Subject to final design (3D as shown below)

Control model Feed forward PID, model-free self-building algorithm, PLC controller
Control accuracy ±0.5℃,Resolution 0.1℃
Cooling capacity

≥7.5kW@25℃ (10HP)

Heating capacity

≥9KW

Temperature change rate Heating and cooling speed ≥4℃/min(with no load)

Coolant

60% Glycol +40% water(Volume ratio)

Flow

  • adjustable,flow accuracy ±0.3L/min,resolution 0.01L/min

Pressure

  1. ,control accuracy ±2Kpa,resolution 0.1Kpa
Connector with battery/pack Water inlet and outlet, 1 inlet and 1 outlet, inlet and outlet pressure and temperature detection, inlet flow detection
Liquid tank 1 liquid tank, internal circulation of liquid

Power

About 17.6KW(subjected to final design)
Cooling mode Ail cooled

Diameter

DN 25

Why Select MENTEK.pdf

Function:


High-low temperature coolant test system for batterys is specially designed for thermal and hydrodynamic test on liquit-cooling battery pack . According to the demands of battery performance test for new energy vehicles,Chiller is equipped with a variety of high performance sensors, with this system, you can:

A. Test flow rate, pressure and temperature of the battery pack coolant
B. Provide the temperature simulation, the pressure simulation and the flow simulation of the temperature range.
C. Support RS485, CAN and other communication protocol,which make the communication with host computer or charging machine available.
D. Various working condition for the battery reliability and stability test can be simulated thanks to the multi-PID which controls the heater and refrigeration units.

DN25 10HP Industrial Chilling Equipment For Battery PackDN25 10HP Industrial Chilling Equipment For Battery Pack
Main Features

1.Wide temperature control range: -40 ℃ - 85 ℃, 0.1 ℃ for minimum temperature fluctuation
2.Direct cooling technology is used. Compressor takes part in the whole temperature control circulation, heating and cooling are together.
3.Heaters are equipped to pre-heat battery pack
4.VF high temperature circulation pump is used to avoid leakage
5.Flow and pressure can be set by equipping sensor and inlet&outlet pressure gauges.
6.Equipped with equal-square valve to test the cooling channel inner resistance of motors.
Application
 Take away the waste heat produced in the process of battery charging/discharging test.
 Battery pack heating test
 High temperature test, to test battery pack’s high temperature performance and stability.
 Thermal performance test, to test the efficiency of battery pack cooling system.
 Variable temperature test, to test the battery’s performance under different temperature.
 Pressure drop test and flow resistance test, to test the inner resistance of battery pack.
 Pressure proof test, to test the sealing property of the battery pack cooling tunnel.
DN25 10HP Industrial Chilling Equipment For Battery Pack
Send your message to this supplier
Send Now

DN25 10HP Industrial Chilling Equipment For Battery Pack

Ask Latest Price
Brand Name :
MENTEK
Certification :
CE
MOQ :
1 Unit
Price :
Negotiable
Payment Terms :
T/T
Supply Ability :
30 sets per month
Contact Supplier
DN25 10HP Industrial Chilling Equipment For Battery Pack
DN25 10HP Industrial Chilling Equipment For Battery Pack

Dongguan YiCun Intelligent Equipment Co.,Ltd

Active Member
7 Years
guangdong, dongguan
Since 1999
Business Type :
Manufacturer
Total Annual :
15,000,000-20,000,000
Employee Number :
50~80
Certification Level :
Active Member
Contact Supplier
Submit Requirement