Spare Parts For Shredder Machine , Customize Blade / Knife for E waste Shredder ,blade use on E waste shredder machine

• 16 years design&manufacturing experience , Guarantee quality
• Factor outlet , professional customization
• Standard size - spot supplies
• Non-standard size / can be customizable base on drawing or original sample

Brief introduction for Blade of plastic film shredder machine

Shredder blade is divided into multi-shaft and single-shaft, the blade for single-shaft shredder is square, and multi-shaft blade is round and has claw, normally there are two claws, three claws, six claws, Octal and twelve claws. The discharge size are decided by the number of claws, the gap and the distance between the blade and the spacer .The blades of multi shaft / single shaft shredder are often used to shred tires, metal shells, wood, wire, plastic and papers, films, etc.with a wide application range.

Normally for double-shaft shredder, there are dual-axis blade, three-axis blade and four-axis blade, the blade material choose the steel with good wear resistance, toughness, high strength, impact resistance. The main materials of the blade include 6CrW2Si, 42CrMo, SKD-11, D2, DC53, LD, Cr12MoV and other high-performance special steel. We also customize blade, claw shaft, spacer and chamber.

For single shaft shredder, the blade diameter is between 200mm-500mm, thickness between 20mm-55mm, the hole is mostly hexagonal, can also be made according to clients demand,like octagonal or circular (with keyway). There are two ways for quenching,which are salt bath furnace quenching and Vacuum furnace quenching,so can guarantee hardness of variety blades meet requirement.

1. Blade processing - Blanking - Forging - Tempering - Primary Processing - Testing - Heat Treatment - Surface Grinding - Wire Cutting - Finishing - Testing - Packaging - Storage (12 Processes)
2. Quality - Selected hard alloy powder, after precision molding using high temperature and pressure sintering,more durable & lasting
3. High precision - The blade edge is grinded by high-precision grinding machine, high precision, finishing can be as good as the mirror effect, sharp edge, no chipping, no edge knife problem. Cut section is smooth, smooth, no burr, no barbed problem
4. Keenness - High hardness, good toughness, sharp edges, good wear resistance, much more longer using life than the ordinary blades, and with the characteristics of anti-oxidation, no rust

Blade of E waste shredder machine

Procedure of customization