Bacnet Electromagnetic flow meter for drinking water utility | SS316 tube | PN16 I CE

Product Description

Our Magnetic Flow Meter features all welded structure, it reduces lifecycle costs and unplanned shutdowns by accurately measuring water and wastewater flows in a variety of utility applications. It has intelligent diagnostics that help users take advantage of improved installation, maintenance and process-management practices. With fully welded sensor construction and an isolated, replaceable terminal block, these makes it the most dependable flow meter available for utility and water applications.

Work principle

The Magnetic flowmeters are often used where the liquid is fed using gravity. Be sure that the orientation of the flowmeter is such that the flowmeter is completely filled with liquid. Failure to ensure that the flowmeter is completely filled with liquid can significantly affect the flow measurement. Be especially careful when operating magnetic flowmeters in vacuum service because some magnetic flowmeter liners can collapse and be sucked into the pipeline in vacuum service, catastrophically damaging the flowmeter. Note that vacuum conditions can occur in pipes that seemingly are not exposed to vacuum service such as pipes in which a gas can condense (often under abnormal conditions). Similarly, excessive temperature in magnetic flowmeters (even briefly under abnormal conditions) can result in permanent flowmeter damage.

Industries Where Used

In order of usage, water/wastewater industry, chemical, food and beverage, oil and gas (although not for oil and gas fluids but in support of the processes), power, pulp and paper, metals and mining, and pharmaceutical.

Accuracy

Grounding

From flow meter housing terminal G to grounding by minimal 1.6mm2 copper cable, resistivity < 10 Ω.

Technical data

Mounting notice

Model selection

Applicable metering liquid:

• Conductive liquid media, conductivity > 5 µS/ cm
• Various Conductive aqueous solutions, water solutions, acid & caustics
• Abrasive slurries, sludges and grease bearing liquids, corrosive liquid, municipal tap water, waste water,dirty
  water, effluent, fibrous, viscous, paper mill, food & beverage

Non-applicable metering medial

• Industrial gas, compressed air, steam, or liquid with large content of gas
• Liquid is non-conductive or low conductive, like lubricating oil, clean oil, cryogenic, cooling water, pure
  water, clean gas, etc.

Notice on the selection of local type and remote type:

Remote type means the transmitter and converter display are mounted in different locations, it’s suggested to select
remote type in the following conditions:

• Ambient temperature or converter display sunshine temperature is over 60 ℃
• High humidity or corrosive air existed
• Serious pipe vibration
• Magnetic meter need be suspended or submersible, uneasily read out
• Other abrasive condition

Pipe Diameter, flow volume and product dimension

Industrial applications

Competitive advantage

• Compliance to international standards: ISO14001, GB/T28001, ISO9001-2008 / GB/T50430
• Strict process control
• Advanced calibration equipment
• Engineer team

Process control

Calibration equipment