Impeller Type DN25 Multi Jet Water Meters / Single Jet Water Meter With Pulse Output
The dry dial water meters use the multi-jet principle, also single jet principle available for smaller port size. This vane wheel water meter is known for its wide range, simple operation, and accuracy in cold water or hot water totalization and flow rate metering. The impeller is centered in a ring of jets, with inlet jets on one level and outlet jets on another. A gear train drives the register totalizer dials. For pulse output, one of the dials is replaced by a gear, which turns a magnet that is detected by an encapsulated sensor threaded into the outside of the lens. Pulse rate is determined by the gear and the dial on which the gear is placed. Changing the pulse rate requires no special tools and can be done in the field.
Feature:
Note:
Working condition:
Maximum Permissible Error:
(1) in the lower zone from qmin inclusive up to but excluding qt is ±5%
(2) in the upper zone from qt inclusive up to and including qs is ±2%
(3) Hot water meter ±3%
Data sheet
Model | Dia (mm) | Class ISO4064 | Overload flow (Qs) | Permanent flow (Qp) | Transitional flow (Qt) | Min flow Qmin | Min reading | Max reading |
(m3/h) | (L/h) | ( m3 ) | ||||||
LXDG-15 | 15 | B | 3.0 | 1.5 | 120 | 30 | 0.00005 | 99,999 |
LXDG-20 | 20 | B | 5.0 | 2.5 | 200 | 50 | 0.00005 | 99,999 |
LXDG-25 | 25 | B | 7.0 | 3.5 | 280 | 70 | 0.00005 | 99,999 |
Dimension
Model | Pipe Dia | Length(L) | Width(B) | Height (H) | Thread |
LXDG-15 | 15 | 110 | 67.5 | 72 | G3/4B |
LXDG-20 | 20 | 130 | 67.5 | 73.5 | G1B |
LXDG-25 | 25 | 130 | 82 | 89 | G1-1/4B |
Competitive Advantage:
Production line
Base water meter