GST GAS330 Gas Leakage Detector Camera with 320x256 / 30μm Cooled Infrared Detector

Driven by improvements in production methods, the production and use of industrial gas has grown rapidly. While bringing benefits to the factory, the hidden danger of gas leakage is also increasingly serious. Optical gas imaging (OGI) is a commonly utilized and very effective way to detector the gas leak in the industrial factories.

GAS330 infrared gas leak detection camera developed by Global Sensor Technology is specific for detecting minute fugitive emissions of industrial gases. With a customized 320x256 / 30µm cooled infrared detector, it works in the spectral range of 3.2~3.5µm for VOCs leak detection.

Global Sensor Technology has more than 10 years of experience in infrared thermal imaging solutions and also many successful integration cases for the gas leak detection. We are confident to provide you with satisfactory service.

- Resolution: 320x256

- Pixel Pitch: 30µm

- NETD≤15mK, High Sensitivity

- Spectral Response: 3.2µm±0.1µm~3.5µm±0.1µm

- Wavelength Customizable Based on Different Requirements

- Integrate with DVP/CameraLink Interface Easily

The GAS330 gas leak detection thermal imaging camera is used for visiualizing the invisible VOCs (volatile organic compounds) and detecting gas leakage such as: Methane, Ethane, Propane, Butane, Pentane, Hexane, Heptane, Octane, Ethylene, Propylene, Isoprene, Methanol, Ethanol, Butanone, Benzene, Toluene, Xylene, Ethylbenzene etc.

1. What is a cryocooler used for?

Cryocoolers are machines that keep sensors extremely cold so that thermal images can be taken on long-term missions. In many high-end applications, the sensors that capture images require extremely low temperatures.

2. What are the main factors to measure the quality of Cryocooler?

Long battery life and reliable operation are main factors to measure the quality of a cryocooler. GSTiR cryocooler has a wide operating temperature range and excellent reliability. Its MTTF (Mean Time to Failures) has reached to 10,000 hours, which meets 24*7 boot operation requirements.

3. What is MTTF?

MTTF (Mean Time to Failure) measures a part’s reliability. It shows you how long on average a part lasts before it breaks and you have to replace it. On a basic level, it tells you about the quality of the parts you’re buying. The longer they last, the more value you’re getting from them.