Desktop Small Fish Tank Mould Removable Portable Water Tank

Products Feature:

1. Main material: imported PE raw material.

2. Common color: orange, blue, green, white or black.And you can order or decide it.

3. Performance: one-piece molding,no welds or joints to fail, smooth internal and external surfaces, excellent hygienic features, UV stabilized for outdoor application, collision resistant, intensive vibration resistant, aging resistant, perfect algae control, easy cleaning, rodent prevention and termite prevention.

4. It is convenient in erection and movement and it can drain off thoroughly.

5. Uniform wall thickness with no thinning at the extremities.

6. Thickness and weight can be varied for extra strength requirements.

Silicone mold instructions and precautions:
1) Do not directly touch an open flame or close to a heat source (such as an oven heating tube). It is recommended that you place the mold in the middle or upper position of the oven during baking, keeping a distance of at least 5cm from the heating tube;
2) Use a neutral detergent in the dishwasher or hot water and use a sponge to clean it normally. Turn the mold over during cleaning, the cleaning effect is better;
3) Do not use the Crisp button of the microwave oven;
4) Do not approach the sharp weapon or use steel balls and other hard cleaning tools to clean;
5) After the baking is completed, take out the baking tray, let it cool for about ten minutes before demoulding, the effect is better;
6) Proper use can extend product life.

Product Description:

Our Advantages:

1. Professional experienced manufacturer for many years
2. Competitive price from factory
3. Timely and short lead time
4. OEM & ODM are welcome

FAQ:

1. When can I get the price?
A: We usually quote within 24 hours after we get your inquiry.

2. How long is the lead time for mold?
A: It depends on the mold’s size and complexity. Normally, it nees about 25-35 days.

3. I don't have 3D drawing, how should I start the new project?
A: You can provide us a sample, we will make 3D drawing design.

4. Can we mass produce in your local?
A: Yes, you can leave the mould in our factory, we can produce for you.

5. Can we get a sample when mould finished?
A: Yes, we usually send out samples for customers' checking, then mass production after samples comfirmed.

6. Before shipment, how to make sure the products quality?
1) We have QC to inspect the products before each shipment.
2) We can send you videos to show the production process.
3) You can come to visit our factory or ask a third party for inspection.

7. How could I pay?
A: Paypal, Western Union, T/T are acceptable, so just let us know which is convenient for you.

8. How to ship?
A: By sea/ By air/ By Express.