White Eco Solvent Media , 380gsm Digital Printing Matte Cotton Canvas For Roland

Canvas Quick Details:

Product Description:

This is a matte,single side coated 100% cotton canvas that is ideal for art and photo reproductions in high volume production.

Easy to stretch and can be fold without cracking.High color density,wide color gamut, excellent water-resistant.Compatible with

pigment and dye based ink printers.

Durability of Media:

Usual Canvas Roll Width & Length:

24" (610mm) roll x 18m

24" (610mm) roll x 30m (or as your requirement)

36" (914mm) roll x 18m
36" (914mm) roll x 30m (or as your requirement)

44" (1118mm) roll x 18m
44" (1118mm) roll x 30m (or as your requirement)

50" (127cm) roll x 18m

50" (127cm) roll x 30m (or as your requirement)

60" (152.4cm) roll x 18m
60" (152.4cm) roll x 30m (or as your requirement)

If you have any other specifical roll width & length demands, kindly pls feel free contact us.

Canvas In Details:

High Grade 380gsm Cotton Matte Digital Printing Canvas Roll For Solvent Ink Printer

(1) strong,easy to stretch and fold without cracking

(2) PH-neutral coating and high white point for consistent

(3) SuiExcellent compatibility with all good quality pigment and dye based on inkjet printers

(4) Good ink absorbable, quick drying time

(5) The standard for Fine Art and Photographic printing

(6) Photo paper details and 100% cotton canvas feel

(7) After printed, the canvas can be coated or varnish

(8) Factory directly source, our canvas can be guaranteed to be of consistent quality

(9) Directly factory source and OEM service is accepted

Advantages:

Usage Instructions:

(1).It is recommended to condition the media in the normal printing environment for 24 hours before printing.While printing,

care must be taken to modify the print file to suit the ink limit of the media.

(2) The media should be printed on within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding

and lower resolution.

(3).Printed media should be thoroughly dried before rolling-up for transport to avoid ink smearing.
Post-processing for hem is not required. If necessary, banner tape is preferred to sewing. Grommets should be placed through

2 layers in the hemline.

(4).Coner grommets should be placed where the vertical and horizontal hemlines meet, so that they pass through the 4 layers of the

media.

(5).Lacquering of the printed media with a clear UV stabilised lacquer is recommended for protection. Pre-test the compatibility of the

lamination film with the printed media prior to use. Please allow adequate drying time of the print before lacquering. This media, when

printed and protected as indicated above (with lacquer), can have an image life expectancy of 18 to 20 months.

(6)A fresh pair of cotton gloves should be used while handling the bare media to avoid sweat, grease and oil transfer on to the media

that could interfere with the print quality.

(7)When not in use, the media should be stored in its original packing in a vertical position.