SFC Servo Three In One 5Ply Corrugated Cardboard Flute Laminating Machine Intelligent 2200mm Litho Laminator

1. Performance characteristics
1. Video monitoring device.
2. Digital design of the entire machine, one click adjustment.
3. Electrical configuration: International brands such as PLC Siemens and main motor Siemens.
4. Adopting a reflux glue system to reduce glue loss and stabilize the glue adhesion effect.
5. The host bearings are automatically lubricated at regular intervals, ensuring smooth operation and extending the lifespan of the equipment.
6. The tile paper pressurization device improves the stability of paper feeding for warped paperboard, and the multifunctional paper tray in the tile paper stacking section is suitable for warped paperboard.
7. There are two types of paper feeding structures for the face paper lifting platform: pre stacking paper structure and non pre stacking paper lifting platform
8. Adopting a dual servo face paper correction structure, the face paper and tile paper (card paper) are automatically detected and servo corrected, ensuring high precision in tracking and adhering to the front gauge of the face paper and tile paper (card paper). The front gauge can be adjusted independently according to product needs.
9. The host adopts a large roller (160mm) design for stable operation and high efficiency. The stainless steel mesh roller of the large roller (160mm) is evenly coated with glue, saving glue amount and not throwing glue.
10. The surface of the laminating roller and pressing roller is made of special polyethylene material, and the glue automatically falls off and is free from wiping.
11. The tile paper feeding structure adopts a leading edge feeding, an extended and widened belt with large suction to ensure stable tile paper and cardboard feeding without damaging the cardboard.
12. Products such as tile paper+tile paper+cardboard pairing, tile paper+tile paper pairing, tile paper+cardboard pairing, cardboard+cardboard pairing, cardboard+gray cardboard+cardboard pairing, etc.
13. The three in one laminating machine can complete the lamination of three or two cardboard sheets at once, and can produce products such as two-layer boards (cardboard+cardboard), three-layer boards, four layer boards, five layer boards, seven layer boards, etc.

2. Parameters:

3. BRANCH INTRODUCTION:
1. Bottom Paper Feeding

3. Eelctrical System

Mainly using Siemens electric system to ensure machine stability, high efficiency and low failure. Using man-machine interface and PLC combination, display all the information on the screen.

Equipped with sensors and servo motor, control top sheets to do independent compensation action to make sure high accuracy. The design of large stainless steel anilox roller (160mm in diameter) is stable and high-efficiency, coat evenly and save glue volume.
Use a circulating glue system to reduce glue loss and stabilize glue adhesion effect.

6. Automatic Lubrication System

Lubricate the bearing regularly to prolong the service life of the bearing and save the cost.

7. Anilox roller & Pressure roller

4. Floor Drawing