15KV Cold Shrink Cable Joints Kits For Connection Outdoor Cable Jointing Kit

1. Introduction:

Chuangyin® Cold Shrink Joints are widely applicable for jointing XLPE/EPR cables medium voltage up to 42 kV, which provides flexibility, easy installation at low temperatures and superior e le c tr ic a l perf or man c e ove r a w i d e ra n ge of op e ra ti n g temperatures. The finished body is expanded and loaded onto a removable supporting core, which allows the joint to be installed without the need for tools or heat.
The splice body provides the essential stress relief, is designed with geometric stress cone on both sides and Faraday Cage in the middle so that stress cone and insulator always keep the active pressure and steady long-term operation to cable. The splice insulation effectively replaces and continues the performance characteristics of the cable insulation across the entire splice.
Chuangyin®Cold Shrink Joints are injection moulded and consists of three layers. A semi-conductive electrode, which forms a F a r a d a y C a ge a r o u n d t h e c o n n e c t o r, a h ig h p e r m it t i v i t y insulation layer, which both insulates and stress controls, and an outer semi-conductive layer which ensures all screens are at earth potential.

The joint is stepped to allow a greater application range for XLPE/EPR cables. Cold Shrink Joints are available for single core and three core cables.
Cable section: 25 to 630 mm2
Voltage Rating: 6/10 (12) kV, 6.35/11 (12) kV, 8.7/15 (17.5) kV, 12/20 (24) kV, 12.7/22 (24) kV, 18/20 (24) kV, 18/30 (36) kV, 20.8/36 (42) kV, 21/35 (40.5) kV, 26/35 (40.5) kV

2. Parameters:

3. Packing:

Cold Shrink Termination Kit

Cleaning Paper

Insulation Tube

Silicone Grease

Sealing Tube

Phase Tape

Installation instruction

Cleaning paper

Ground wire

Constantforce Spring

Accessories

Glue For Sealing And Filling

5. Model Option: