42KV 800A /1250A Indoor Epoxy Resin Cast Bushing GIS Bushing IEC
1. Introduction:
Plug-in Bushing is suitable for GIS incoming wire connection and SF6 sealing.
Compact and fully insulated design is suitable for outdoor free from
maintenance.
Meets the standard of EN50180-50181 interface.
2. Features:
Made of epoxy resin
Produced by APG technology
100% factory tested
3. Parameters:
Part No. | 2# |
Um Maximum System Voltage(Um) | 42kV |
Rated Current | 800A |
AC Withstand Voltage 5min | 117kV |
Partial Discharge | 45kV10pC |
Impulse Withstand Voltage (10 times for each polarity) | 200kV |
4. Selection Table:
Part No. | 2# | |
Dimensions | L1mm | 125 |
L2mm | 140 | |
<pDmm | 39 | |
Installation | Bushing position 1mm | 107 |
n | 3 | |
22mm | 102 | |
N | 3 |
Model Option:
Model | Part No. |
Plug-in Bushing 2# | CYS-NC-2 |
Drawings and Dimensions: