We are manufacturer for LATCHING RELAY FOR ENERGY METER
LATCHING RELAY 60A Part No. CY-JMD-09V03
CY-JMD-09V03
CY-JMD-09V22
CY-JMD-09V08
Latching Relay 80A
CY-JMD-09V21
CY-JMD-12V14
CY-JMD-12V05
Latching Relay 90A:
CY-JMD-09V19
Latching Relay 100A:
CY-JMD-12V11
CY-JMD-09V04
CY-JMD-09V25
CY-JMD-12V09
CY-JMD-09V23
CY-JMD-09V07
Latching Relay 120A:
CY-JMD-12V10
Latching Relay 200A:
CY-JMS-12V20
Three Phase Latching Relay 80A/100A:
CY-JMD-09V26
CY-JMS-12V13
LATCHING RELAY 60A Part No. CY-JMD-09V03
1.Part Number Description:
2.Character:
Meet to IEC62055-31-2005—UC2
According to RoHS requirements
Large switching power with mini body
Big strengthof magnetic latching power,anti-shock of vibration
Pulse drive,economy of power consumption and no heat rising
Permanent magnetic strength to keep stability,and save power consumption
Small contact resistance ,and little self-consumption with reliable working
3.Application:
Electronic energy meter
Automatic meter reading system
Lamp controller
Complex switch
Home appliance and automatic control equipment
4.Coil Specification:
Rated voltage | Action voltage (VDC) | Max coil voltage(V) | Coil resistance x(1±10%)Ω | Rated power | |
Single coil | Double coil | ||||
6 | 4.8 | 12 | 36 | 18+18 | Single coil 1W
Double coil 2W |
9 | 7.2 | 18 | 81 | 40.5+40.5 | |
12 | 9.6 | 24 | 144 | 72+72 | |
24 | 19.2 | 48 | 576 | 288+288 | |
48 | 38.4 | 96 | 2304 | 1152+1152 |
5.Technical Specification:
Contact type | 1B(1A) | Insulation resistance | ≥1000MΩ(500VDC) | |
Contact material | AgSoO2 | Dielectric strength | Coil--contact | ≥4000VAC 1min |
Contact--contact | ≥1500VAC 1min | |||
Contact load (resistance) | 60A 250VAC | Action time | close | ≤20mS |
open | ≤20mS | |||
Contact resistance (mΩ) | ≤2mΩ | Action impulse duration | 50mS-240mS | |
Max switching voltage | 250VAC | Life (time) | Electrical life(ops) | 1x 104 (circle) |
Mechanical life (ops) | 1x 106 (circle) | |||
Max switching current | 60A | Max action frequency | 1200 ops/h | |
Max switching power | 15KVA | Vibration tolerance | 98m/s2 | |
Short time impact current | 2500A 10ms no sinter 4500A 10ms no explosion | Shock tolerance | 10-50Hz 1.0mm | |
Ambient temperature | -40℃ to +70℃
| Relative humidity | 90% RH 40℃ |
6.Dimension:
7.Wiring Diagram:
Remarks:
8.The drawing does not show tolerance. It is subject to below range:
≤1mm ±0.2
1-5mm ±0.3
≥5mm ±0.4
9.The output terminal in above drawing is for customers’reference only. The dimension and connection way of output terminal can be customerized.
Note: The type of output can be made as per customers’ requirements.
Kindly Note:
Our Factory Products Catalog as Follow:
I. Instrument Transformer(Epoxy Resin Type, upto72.5kV)
i. LV & MV Current/Voltage Transformer
ii. Electronic Instrument Transformer/LPIT/Sensor Split Core Current Transformer/Rogowski Coil
iii. Split Core Current Transformer/Rogowski Coil
II. Cable Accessories(EPDM, upto42kV)
i. Separable Connector IEC/IEEE
ii. Busbar Connection System
iii. Switchgear Insulation Components
iv. Cold Shrink Cable Accessories
Thanks!
Welcome to Chuangyin(CY)!
Hope a nice shopping time!