Mold Injection Series Current Transformer --O type
1. Adopted high permeability core,high accuracy excellent linearity performance.
2. Fully enclosed,with high function of current isolation and nice outline.
3. Flexible wires as primary.Can connect types of terminals.
4. Linear output with accurate current. Can realize for multi ratio output.
5. DC immunity.
6. Encapsulated by mold Injection of environmental plastic. Anti-erosion and excellent seal
Single phase and multi-phase electricity meter.
DESCRIPTION:
1. Ambient temperature: -40℃ ~ +75℃.
2. Insulation resistance: ≥1000MΩ(DC500V).
3. Dielectric strength : 4000VAC 1mA 60S.
Specification:
No. | Rated Pri. Current (A) | Max. Current (A) | Rated Sec. Current (mA) | Load Resistance (Ω) | AC Accuracy | DC Accuracy |
1 | 1.5 | 6/9 | 1/5.0/7.5 | 5/10/20/40 | 0.1/0.2/0.5 | 1.0/2.0 |
2 | 2.5 | 10/15 | 2.5 | 5/10/20 | 0.1/0.2/0.5 | 1.0/2.0 |
3 | 5 | 20/30/40/60 | 2.0/2.5/5.0 | 5/10/20 | 0.1/0.2/0.5 | 1.0/2.0 |
4 | 10 | 40/60/100 | 4.0/5.0/10 | 10/20 | 0.1/0.2/0.5 | 1.0/2.0 |
5 | 15 | 60/100 | 10/15 | 10 | 0.1/0.2/0.5 | 1.0/2.0 |
6 | 20 | 80/100/120 | 8.0/10/20 | 10 | 0.1/0.2/0.5 | 1.0/2.0 |
Product No. | Size (mm) | ||||||||
A | B | C | D | E | F | G | H | I | |
Q-01 | 11 | 25 | 3~10 | 120 | 21 | 30 | 6.2 | 18 | 2.0 |
12 | 29 | 3~10 | 120 | 20 | 29 | 6.2 | 15 | 2.5 | |
11 | 25 | 3~10 | 120 | 20 | 28 | 6.0 | 18 | 2.5 | |
16 | 33.5 | 3~10 | 120 | 23.8 | 33.1 | 6.2 | 17.6 | 2.3 | |
12 | 28 | 3~10 | 120 | 21 | 29 | 5.2 | 15 | 1.8 | |
13.4 | 24.5 | 3~10 | 120 | 20 | 26.5 | 4.2 | 17 | 3.5 |
Outline Drawing: