MTL Surge Protector IOP32, standard DIN rail mounting, stock
Introduction to the TL Surge Protector IOP32
The IOP series is designed to provide protection for both digital I/O and analog I/O. It is the most economical I/O surge protection solution in Eaton's products. High packing density, high degree of protection and low price make the IOP series a popular solution.
The IOP series is not only cost-effective, but also retains a hybrid circuit consisting of a 20kA gas discharge tube and solid-state components. In terms of design, this impressive product has a very low line resistance, so only a small voltage drop is added to the circuit.
The detachable terminals of the IOP series allow for easy installation and maintenance, and the circuit can be disconnected by unplugging the terminals on the module side. The angle of the wire entry facilitates routing within a space-constrained enclosure.
MTL Surge Protector IOP32 Technical Parameters
All figures are at 25° C (77° F).
Unless otherwise stated.
Inrush current
20kA(8/20s waveform)/line
Leakage current
<1A, under the condition of operating voltage
Rated load current
0.675A (5A for IOP HC32)
Loop resistance
IOP32 & IOP32D:4 ohm
IOP-AC:1 ohm
IOP HC32:0 ohm
bandwidth
6.5 MHz (IOP HC32 N/A)
attenuation
< –0.3dB @ < 1MHz
–3.0dB @ 6.5MHz
Response time
<1ns
Ambient temperature
Work & Storage
-40° C to +80° C (-40° F to
+176° F)
(See "Approval" below)
humidity
5-95% relative humidity (non-condensing)
Terminal
2.5mm2(12 AWG)
Electrical connections
Plug/head screw terminal plate
Installation
T-beam DIN rails
(35 x 15mm rails)
weight
Approx. 140g (5oz.)
Enclosure flame resistance
UL94-V0
EMC compliance
BS EN 61326-1:2006
Electrical safety
BS EN 60950-
1:2006+A12:2011
BS EN 61010-1:2010
Manufacturer | MTL Instruments |
Product type | Vibration Transducer Interface |
Product no | MTL IOP32 |
Why Choose Us
◆How long is your warranty ?
Normally our warranty is 1 year .
◆Do you supply 100% original and new products?
Of course. Our products are 100% brand-new and original!!!
◆How is payment term ?
It is negotiable. Normally our payment term is 30% deposit, balance before shipment if the amount less than 5000USD.
◆Do you have any stock or need buy from other suppliers?
We saves lots of stocks for selling. RTS is our advantage.
◆If we make a payment, when will you start the production?
As soon as we receive the payment, we will arrange the production. Statement:GSI is not an authorized dealer, agent or affiliate of any of the designer, brands, or manufacturer, the products of which are offered for sale on ALI.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the rights of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All products are 100% genuine and legally purchased from authorized sources.