In recent years, the sliding pipe support has gone through professional production practice and scientific operation. The skeleton material based on carbon steel and the cooling material PIR are the main raw materials for the production of this kind of support system, whose quality and performance have been guaranteed and recognized.
Sliding Pipe Support DN80 ( 3 inch) *100 has below technical parameters:
1.Pipe diameter: 89mm
2.cooling thickness: 100mm
3.Bottom floor width(W):150mm
4.Iron piece length(L):150mm
5.ear plate width(E):50mm
6.Pipe bottom elevation(H):80mm
Sliding Pipe Support DN80 ( 3 inch) *100 uses high density (HDPIR) as the cold insulation block. HDPIR is a kind of foaming polymer, with the features of plastic, rubber and cork. The raw materials are isocyanate, polyether, foaming agent, catalyst, flame retardant, etc. After high speed stirring, materials react and foam to cellular structure product, composed of millions of tiny and uniform sealed cells. It provide benefits of low density, low thermal conductivity, low water absorption. The performance is better than timber.
The HDPIR that used in Sliding Pipe Support DN80 ( 3 inch) *100 has such technical parameters:
1.Avg. Density: 160 kg/m3
2.Thermal Conductivity ( 20℃ ): ≤0.032W/m.K
3.Compressive Strength( normal temperature ): ≥2.0 MPa
4.Water Absorption: ≤2.0%
5.Closed Cell Content: >95%.
6.Linear Expansion Coefficient (-l65- 20℃ ): ≤65 x 10-6 1/K
7.Application Temperature: -306℃
The structure is showed in below picture.