Hot Sell Warm Edge Thchnolgy Butyl Aluminum Sapcer For Double Glass

Warm Adge Spacer - New Technolty Working with IG Syetem

Warm edge spacer of insulating glass

Characteristics:
1. Good sealability: longer water vapor struction barrier such as water vapour.

2. Higher production efficiency: inserting angle is not needed. Rubber spacer can be bent

randomly. Profiled insulating glasses in various shapes canbe fabricated;

3. Good air tightness: macromolecule agglomerant and tackifier guarantee excellent seal properity.aluminum strip fully obstructs the infiltration of water vapor;
4. High temperature resistance: macromolecule tackifier improves the high temperature resistant and High moisture resistant properties of insulating glass;
5. Low temperature resistance: the enclosed mixing of desiccant and butyl-rubber ensures that the insulating glass is not dewfall at -50 °C;
6. Ageing resistance: macromolecule raw materials, antideteriorant, ultraviolet absorber and shielded agent.

Warm Adge Spacer - New Technolty Working with IG Syetem

The spacer is made to connect two or more pieces of glass glazing sheets which might be low e or reflective glass or normal float colored glass .The spacer was filled with desiccant together. Insulated glass/ Hollow glass/IGU/Double glazing glass with the perimeter of the spacer that gets in contact

with the glass is properly sealed with primary and secondary sealants to ensure it with air/argon tight.

Keywords: warm edge spacer.flexible spacer bar.rubber spacer with aluminum

Use for Manufacturing building doors and windows,Train,Bus,insulating glass ,insulating door, shutter,Refrigeration equipment and so on.

​

Features:

1.The glass looks more beautiful with the aluminum strip on surface, and the appearance meeting the requirements for aluminum-frame type insulating glass, significantly improving its level.

2.The ageing-resistant performance remarkably enhances. The aluminum strip on surface effectively resists the ultraviolet irradiation, reinforcing the ageing-resistant performance of the spacer to a large extent.

3.Simple operation makes higher production efficiency.Adopting Kation spacer can take the place of complex processing procedure of traditional aluminum-frame type insulating glass.

Usage and attention:

1.The glasss by the washing machine to clean after drying, the one on the corner of a piece of glass paste interval article,article straighten interval,

and edge of the glass to keep a distance of 2.5~3.0mm,and then from the edge of the glass will be around full article interval,Good sealing tape on interfaces,

Pincer-like device reserved 2mm-3mm gap,and about 20mm apart more joint,insert the sealing tape in space,then joint pressure sealing tape,pinched connectors.

2.Put another piece of glass paste good spacing bar glass above,two pieces of glass must be mutual alignment,up and down to the flat.

3.Will paste together of hollow glass into hot press,hot pressing temperature control between 110-140℃,the outlet temperature control between 50-60 ℃.

4.According to the structure requirement to normal play a two-component silicone sealant,thus insulating glass production.

5.This product seal must be carried out in accordance with the article butyl interval sealing operation schematic drawing process,otherwise may cause the seal leakage.

1. 

   FAQ:

   Q1: Are you a factory or trading company?
   A: We are a group company included glass machinery factory glass material factory and trading company, and we are professinal manufacture who produces glass machine and materials in China.
   
   Q2: Where is your factory located?
   A: Our factory is located in Jinan City, Shandong Province, China.
   
   Q3. What is your sample policy?
   A: We can supply the sample if we have ready parts in stock, the samples are free of charge, but the customers have to pay the courier cost.

   Q4: Can you make the product according to my design or original sample?
   A: Sure, we have a rich experience of professional and technical staff who will make the most suitable and satisfied designs for you.

   Q5. How to ensure product quality?
   A: We have 100% inspection during production, you (or your representatives) also can come to inspect the goods before delivery from our factory.

   Q6: How do you make our business long-term and good relationship?
   A: We will always keep the best quality product and the most competitive price to ensure our clients the best interests. Also we will regard you as our good friend in life and a reliable partner in business cooperation.

   As professinal Insulating glass machine manufacture in China,except material such as Moleculaer sieve and aluminum spacer and sealant . We are good at develping and producing automatic vertical insulaing glass processing production line ,vertical low-e glass egde deleting machine,automatice robot insulaiting glass production line and so on.

​