Glass Lifting Machine For Insulating Glass Loading And Unloading

Jib crane is common light lifting equipment in modern production.

It is fit for frequent lifting work of short distance between fixed positions.

It has advantages of high efficiency, energy saving, convenience, occupying a small area and easy operation and maintenance.

• It is operated by using compressed air instead of using electricity.
• When the compressed air stop , glass wont fall and broken, we guarantee a safe production.
• All pneumatic components, we use Japanese SMC brand, we use German SCHMALZ products for vacuum parts which is the most advanced technology of pneumatic and vacuum control in the world.
• Long distance of electric lift and down. Double speed control , guarantee fast speed , position accuracy and stability.
• Rotate and flip are 0-90°, the official load is 400 kg, but it can be used within 500-600 kg

500-600 kg

This machine is reliable and safe, easy to operate.

The device is commonly used for glass loading and unloading work in glass deep processing process, such as cutting, grinding, cleaning, tempering furnace, lamination glass and insulated glass.

This device is usually used together with jib crane beam or gantry crane frame, depending on the client's requirements.

Parameters:

Parameters:

Parameters:

Other products of LIJIANG GLASS

LJBZ2025 Vertical Automatic Insulating glass production line

APPLICATION

As the most important process of insulating glass production, we are especially professional in glass cleaning, transmitting pressing and gas filling(optional).The production line can do double glass,triple glass and stepped glass.

1. Low-e glass sensor

This sensor is installed before washing machine.It can automatically recognize Low-e glass,preventing the glass from dropping Low-e surface.

2. Conveyor roller

The transfer wheel in the washing and drying section : The front and back transfer wheel are all moved, all actively transferred. It can guarantee the big size glass and thick glass pass through smoothly.

3. Washing&Drying machine

The whole washing &drying machine adopts stainless steel,including the plate and interior spare parts.And some slider block are copper.

3.1 Washing part

It has 3 pair of brushes, which are all soft brushes, washing flat glass,tempering glass and low-e glass.It has a diameter of less than 0.1mmde bristles,which will never damage glass,especially low-e glass .

Noise reduction device

The noise can be controlled below 90 decibels by using nylon gear and sponges.

4.1 Pressing way

It presses IGUs by hydraulic station with pressure, it guarantees the precise pressure.

4.2 Energy saving of pressing function

It adopts 3 micro switches,which divide the pressing part into 4 sections.

Each micro switch receives the signal and adds a part of the working area. When the corresponding micro switch is not touched, the region does not work.

The work area can be divided in this way.

4.4 Stepped glass(Optional)

It also can make stepped glass with a servo motor.

5, touchscreen and electric box.

Main Parameters:

Main components: