Specifications
Brand Name :
LIJIANG GLASS
Model Number :
LJWBQJ2500
Certification :
CE
Place of Origin :
CHINA
MOQ :
ONE SET
Price :
USD 25,000 to USD 18,000
Payment Terms :
L/C, T/T
Supply Ability :
10 units per month
Delivery Time :
Within 15 working days
Packaging Details :
Containers and wooden boxes
Power :
42Kw
Dimension(L*W*H) :
6260*4800*3100
Weight :
3940 kg
Key Selling Points :
Low Noise Level
Glass Thickness :
2-25mm
Marketing Type :
Ordinary Product
Description

Automatic Horizontal and Vertical Glass Washer and Dryer Machine for insulating glass processing

Automatic Horizontal Glass Washing and Drying Machine LJWBQJ2500
Automatic Horizontal Glass Washing and Drying Machine LJWBQJ2500 used for cleaning and drying the upper and lower surfaces of ordinary plate glass and high quality low-e glass,it is composed of incoming segment, cleaning air-drying segment and out goingsegment.
Structural characteristics:

* The rest of the sheet metal parts are sprayed with advanced mechanical paint or powder;
* Aluminum alloy assembled structure, no scrap concept, permanent use,high efficiency, energy saving 70% efficiency;
* The rubber roller is made of vulcanized rubber with stainless steel shaft;
* The washing part in contact with water is made of stainless steel;
* Cleaning department, wind staff overall lift, the maximum lift: 350mm,easy to clean and maintain;
* Three pairs of brush(Ø150mm)Stainless steel shaft configuration (low-e glass, ordinary coated glass and sunshine coated glass can be washed without damaging the coated surface);
* Two pairs of special stainless steel aluminum alloy air knife configuration, strong wind, good air drying effect, with heating system(with temperature control device, optional opening and closing);
* The fan is equipped with air filter in the air inlet chamber, with large air volume and good air drying effect,The whole fan box is installed in the upper part of the workshop, with the air filter screen on the side for easy inspection and cleaning;
* Main drive for gear transmission, frequency control, digital display , the rotation of the brush roller in the washing section is driven by independent belts of the upper and lower motors respectively, the frequency conversion adjustment speed is stable,the service life is long, realizes the cleaning high request special glass;
* Mechanical button control, cleaning machine digital display, easy to operate, easy to operate, easy to maintain;
* Washing machine water tank outside, convenient water tank cleaning, water change, check, so that the washing machine cleaning effect is cleaner.
* Optional with PLC control, touch screen display.It is convenient for workers to operate and maintain, and can be connected to all manufacturers of edge grinding machines without gap.(purchase separately if necessary)
Maximum glass width
2500mm (effective maximum: 2650mm)
Minimum glass specification
400mm×400mm (limited to single row on left and right sides)
Glass thickness
3mm-25mm (digital display)
Speed range
glass thickness within 3-25mm Vmax=1-12m/min
Main drive, brush speed regulation method
frequency control
Table height
900±25mm
Total power
42KW(water-bearing wind heating: 15KW)
Water source
self-circulation, tap water (according to civil water standards) and deionized water water supplement (deionized water equipment
shall be provided by the buyer)
Power source
380V 50Hz
Dimensions (length × width × height)
approximately 6260*4800*3100mm
Weight
3940kg

►►►Water spray header

►►►CE electrical connecting design

►►►Brushes for washing

►►►Fan blower low noise

Vertical Glass Washing and Drying Machine
LJLBQJ2500
The whole washing &drying machine adopts stainless steel, including the plate and interior spare parts.And some slider block are
copper.It has 3 pair of brushes, which are all soft brushes, washing flat glass,tempering glass and low-e glass.It has a diameter
of less than 0.1mmde bristles,which will never damage glass,especially low-e glass .

* In the washing machine ,there three pairs soft brushes all can wash low-e glass, four pairs of water spray.
* The material in the washing and drying section all made by stainless steel.
* The main power consumption is mostly appear in the washing and drying section of the IG line.
* The air knife is float design , it always keep the right and suitable distance between the glass and air knife in the press and
design section
* The transfer wheel in the washing and drying section : The front and back transfer wheel are all moved, all actively
transferred. No mater the glass size is big or small , it all guarantee the glass pass through smoothly.

* The axle and bearing of brushes are stainless steel , that all keep the machine can washing well and live for a long time.
* The who drying machine use the sound insulation design. can reduce the noise.
Send your message to this supplier
Send Now

Horizontal And Vertical Glass Washer And Dryer Machine For Insulating Glass Processing

Ask Latest Price
Brand Name :
LIJIANG GLASS
Model Number :
LJWBQJ2500
Certification :
CE
Place of Origin :
CHINA
MOQ :
ONE SET
Price :
USD 25,000 to USD 18,000
Contact Supplier
Horizontal And Vertical Glass Washer And Dryer Machine For Insulating Glass Processing
Horizontal And Vertical Glass Washer And Dryer Machine For Insulating Glass Processing
Horizontal And Vertical Glass Washer And Dryer Machine For Insulating Glass Processing
Horizontal And Vertical Glass Washer And Dryer Machine For Insulating Glass Processing
Horizontal And Vertical Glass Washer And Dryer Machine For Insulating Glass Processing

Jinan Lijiang Automation Equipment Co., Ltd.

Site Member
7 Years
shandong, jinan
Since 2007
Business Type :
Manufacturer
Total Annual :
2000000-5000000
Employee Number :
150~170
Certification Level :
Site Member
Contact Supplier
Submit Requirement