Specifications
Brand Name :
onsemi
Model Number :
NCP133AMXADJTCG
MOQ :
1
Price :
Based on current price
Payment Terms :
T/T
Supply Ability :
In stock
Delivery Time :
3-5 work days
Packaging Details :
anti-static bag & cardboard box
Output Configuration :
Positive
Output Type :
Adjustable
Number of Regulators :
1
Voltage - Input (Max) :
5.5V
Voltage - Output (Min/Fixed) :
0.8V
Voltage - Output (Max) :
3.6V
Voltage Dropout (Max) :
0.25V @ 500mA
Current - Output :
500mA
Current - Quiescent (Iq) :
-
Current - Supply (Max) :
-
PSRR :
80dB ~ 70dB (1kHz)
Control Features :
Enable
Protection Features :
Over Current, Over Temperature, Under Voltage Lockout (UVLO)
Operating Temperature :
-40°C ~ 85°C
Mounting Type :
Surface Mount
Package / Case :
6-XFDFN Exposed Pad
Supplier Device Package :
6-XDFN (1.2x1.2)
Description

Product Details

The NCP1338 combines a true current mode modulator and a demagnetization detector which ensures full Borderline/Critical Conduction Mode in any load/line conditions together with minimum drain voltage switching (Quasi−Resonant operation). The transformer core reset detection is done internally, without using any external signal, due to the Soxyless concept. The frequency is internally limited to 130 kHz, preventing the controller from operating above the 150 kHz CISPR−22 EMI starting limit.

Features

• Free−Running Borderline/Critical Mode Quasi−Resonant Operation
• Current−Mode
• Soft−Skip Mode with Minimum Switching Frequency for Standby
• Auto−Recovery Short−Circuit Protection Independent of Auxiliary Voltage
• Overvoltage Protection
• Brown−Out Protection
• Two Externally Triggerable Fault Comparators (one for a disable function, and the other for a permanent latch)
• Internal 4.0 ms Soft−Start
• 500 mA Peak Current Drive Sink Capability
• 130 kHz Max Frequency
• Internal Leading Edge Blanking
• Internal Temperature Shutdown
• Direct Optocoupler Connection
• Dynamic Self−Supply with Levels of 12 V (On) and 10 V (Off)
• SPICE Models Available for TRANsient and AC Analysis
• These are Pb−Free Devices

Typical Applications

• AC−DC Adapters for Notebooks, etc.
• Offline Battery Chargers
• Consumer Electronics (DVD Players, Set−Top Boxes, TVs, etc.)
• Auxiliary Power Supplies (USB, Appliances, TVs, etc.)

Specifications

Attribute Attribute Value
Manufacturer onsemi
Product Category Linear Voltage Regulators
Series -
Product CMOS LDO Regulators
Type 500 mA Very Low Dropout Bias Rail CMOS Voltage Regulator
Packaging Alternate Packaging
Mounting-Style SMD/SMT
Package-Case 6-XFDFN Exposed Pad
Operating-Temperature -40°C ~ 85°C
Mounting-Type Surface Mount
Output-Type Adjustable
Supplier-Device-Package 6-XDFN (1.2x1.2)
Voltage-Input 0.8 V ~ 5.5 V
Number-of-Outputs 1 Output
Current-Output 500mA
Voltage-Output 0.8 V ~ 3.6 V
Regulator-Topology Positive Adjustable
Voltage-Dropout-Typical 0.14V @ 500mA
Number-of-Regulators 1 Regulator
Current-Limit-Min 550mA
Maximum Operating Temperature + 85 C
Operating temperature range - 40 C
Output-Voltage 800 mV to 3.6 V
Input-Voltage-MAX 5.5 V
Output-Current 500 mA
Input-Voltage-MIN 0.8 V
Load-Regulation 1.5 mV
Voltage-Regulation-Accuracy 0.5 %
Package-Case XDFN-6
Reference-Voltage 0.8 V
Dropout-Voltage-Max 250 mV
Line-Regulation 0.01 %/V
Power Supply Ripple Rejection (PSRR) 70 dB

Descriptions

Linear Voltage Regulator IC Positive Adjustable 1 Output 0.8 V ~ 3.6 V 500mA 6-XDFN (1.2x1.2)
LDO Regulator Pos 0.8V to 3.6V 0.5A 6-Pin XDFN EP T/R
LDO Voltage Regulators 500MA VLDO BIAS RAIL CMOS
Send your message to this supplier
Send Now

NCP133AMXADJTCG IC REG LIN POS ADJ 500MA 6XDFN onsemi

Ask Latest Price
Brand Name :
onsemi
Model Number :
NCP133AMXADJTCG
MOQ :
1
Price :
Based on current price
Payment Terms :
T/T
Supply Ability :
In stock
Contact Supplier
NCP133AMXADJTCG IC REG LIN POS ADJ 500MA 6XDFN onsemi

Sanhuang electronics (Hong Kong) Co., Limited

Verified Supplier
3 Years
shenzhen
Since 2005
Business Type :
Distributor/Wholesaler, Trading Company
Total Annual :
1000000-3000000
Employee Number :
100~150
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement