Programmable Integrated Circuits EPM570F256C5N MAX II Device 160 I/O Programmable Logic IC

Specifications

Description

The MAX® II family of instant-on, non-volatile CPLDs is based on a 0.18-µm, 6-layer-metal-flash process,

with densities from 240 to 2,210 logic elements (LEs) (128 to 2,210 equivalent macrocells) and non-volatile

storage of 8 Kbits. MAX II devices offer high I/O counts, fast performance, and reliable fitting versus other

CPLD architectures. Featuring MultiVolt core, a user flash memory (UFM) block, and enhanced in-system

programmability (ISP), MAX II devices are designed to reduce cost and power while providing programmable

solutions for applications such as bus bridging, I/O expansion, power-on reset (POR) and sequencing control,

and device configuration control.

Features

The MAX II CPLD has the following features:

Low-cost, low-power CPLD

Instant-on, non-volatile architecture

Standby current as low as 25 µA

Provides fast propagation delay and clock-to-output times

Provides four global clocks with two clocks available per logic array block (LAB)

UFM block up to 8 Kbits for non-volatile storage

MultiVolt core enabling external supply voltages to the device of either 3.3 V/2.5 V or 1.8 V

MultiVolt I/O interface supporting 3.3-V, 2.5-V, 1.8-V, and 1.5-V logic levels

Bus-friendly architecture including programmable slew rate, drive strength, bus-hold, and

programmable pull-up resistors

Schmitt triggers enabling noise tolerant inputs (programmable per pin)

I/Os are fully compliant with the Peripheral Component Interconnect Special Interest Group

(PCI SIG) PCI Local Bus Specification, Revision 2.2 for 3.3-V operation at 66 MHz

Supports hot-socketing

Built-in Joint Test Action Group (JTAG) boundary-scan test (BST) circuitry compliant with

IEEE Std. 1149.1-1990

ISP circuitry compliant with IEEE Std. 1532

Trading Guide