MT29F1G01ABAFDWB-IT:F NAND Flash memory ic chip SLC 1Gbit 1GX1 UPDFN 35 mA UPDFN-8

Specifications

Description

Serial peripheral interface (SPI) NAND is an SLC NAND Flash memory device that provides a cost-effective

nonvolatile memory storage solution where pin count must be kept to a minimum. It is also an alternative

solution to SPI NOR, offering superior write performance and cost per bit over SPI NOR.

The hardware interface creates a low pin-count device with a standard pinout that remains the same from

one density to another and supports future upgrades to higher densities without board redesign.

The serial electrical interface follows the industry-standard serial peripheral interface. New command

protocols and registers are defined for SPI operation. The command set resembles common SPI-NOR

command sets, modified to handle NAND specific functions and additional new features.

Features

• Single-level cell (SLC) technology

• 1Gb density

• Organization

– Page size x1: 2176 bytes (2048 + 128 bytes)

– Block size: 64 pages (128K + 8K bytes)

– Plane size: 1Gb (1 plane, 1024 blocks per plane)

• Standard and extended SPI-compatible serial bus in-terface

– Instruction, address on 1 pin; data out on 1, 2, or 4 pins

– Instruction on 1 pin; address, data out on 2 or 4 pins

– Instruction, address on 1 pin; data in on 1 or 4 pins

• Device initialization

– Automatic device initialization after power-up

• Security

– Blocks 7:0 are valid when shipped from factory with ECC enabled

– Software write protection with lock register

– Hardware write protection to freeze BP bits

– Lock tight to freeze BP bits during one power cycle

• Permanent block lock protection – OTP Space: 10 pages one-time programmable NAND Flash memory area

• Operating voltage range

– VCC = 2.7–3.6V

• Operating temperature

– Industrial: –40°C to +85°C

• Quality and reliability – Data retention: JESD47H-compliant; see qualification report

– Additional: Uncycled data retention: 10 years 24/7 @85°C

– Endurance: 100,000 PROGRAM/ERASE cycles • Package

– 6-pin SOP, 300 mils

– 8-pin U-PDFN, 8mm x 6mm x 0.65mm (MLP8)

– 24-ball T-PBGA, 05/6mm x 8mm (5 x 5 array)

Trading Guides