High-density performance line Arm®-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces

Arm Based Microcontroller STM32F103VET6 32BIT Cortex M3 512B Flash 100pin

> Features

• Core: Arm® 32-bit Cortex®-M3 CPU

– 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access

– Single-cycle multiplication and hardware division

• Memories

– 256 to 512 Kbytes of Flash memory

– up to 64 Kbytes of SRAM

– Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories

– LCD parallel interface, 8080/6800 modes

• Clock, reset and supply management

– 2.0 to 3.6 V application supply and I/Os

– POR, PDR, and programmable voltage detector (PVD)

– 4-to-16 MHz crystal oscillator

– Internal 8 MHz factory-trimmed RC

– Internal 40 kHz RC with calibration

– 32 kHz oscillator for RTC with calibration

• Low power

– Sleep, Stop and Standby modes

– VBAT supply for RTC and backup registers

• 3 × 12-bit, 1 µs A/D converters (up to 21 channels)

– Conversion range: 0 to 3.6 V

– Triple-sample and hold capability

– Temperature sensor

• 2 × 12-bit D/A converters

• DMA: 12-channel DMA controller

– Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs • Debug mode

– Serial wire debug (SWD) & JTAG interfaces

– Cortex®-M3 Embedded Trace Macrocell™

• Up to 112 fast I/O ports

– 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

> Description

The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance Arm® Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16- bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.

The STM32F103xC/D/E high-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.

These features make the STM32F103xC/D/E high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC.

> Specifications

> Trading Guide

Shipping:

---Delivery period: For in-stock parts, orders are estimated to ship out in 3 days,Once shipped, estimated

delivery time depends on the below carriers you chose:

» DHL Express, 3-7 business days.
» DHL eCommerce,12-22 business days.
» FedEx International Priority, 3-7 business days
» EMS, 10-15 business days.
» Registered Air Mail, 15-30 business days.

---Shipping rates: After confirming the order, we will evaluate the shipping cost based on the weight of the

goods.

---Shipping option: We provide DHL, FedEx, EMS, SF Express, and Registered Air Mail international shipping.

---Shipping tracking: We will notify you by email with tracking number once order is shipped.

Returning warranty:

---Returning: Returns are normally accepted when completed within 30 days from date of shipment.Parts

should be unused and in original packaging. Customer has to take charge for the shipping.

Warranty:

---All Retechip purchases come with a 30day money back return policyThis warranty shall not apply to any

item where defects have been caused by improper customer assembly, failure by customer to follow

instructions,product modification, negligent or improper operation.

Ordering:

---T/T,PayPal, Credit Card includes Visa, Master, American Express.