ARM MCU 480 MHz 140 I/O 1.62V to 3.6V UFBGA-176

Features

Core

• 32-bit Arm® Cortex®-M7 core with doubleprecision FPU and L1 cache: 16 Kbytes of data and 16 Kbytes of instruction cache; frequency up to 480 MHz, MPU, 1027 DMIPS/ 2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions Memories

• 128 Kbytes of Flash memory

• 1 Mbyte of RAM: 192 Kbytes of TCM RAM (inc. 64 Kbytes of ITCM RAM + 128 Kbytes of DTCM RAM for time critical routines), 864 Kbytes of user SRAM, and 4 Kbytes of SRAM in Backup domain

• Dual mode Quad-SPI memory interface running up to 133 MHz

• Flexible external memory controller with up to 32-bit data bus:

– SRAM, PSRAM, NOR Flash memory clocked up to 133 MHz in synchronous mode

– SDRAM/LPSDR SDRAM– 8/16-bit NAND Flash memories

• CRC calculation unit Security

• ROP, PC-ROP, active tamper, secure firmware upgrade support, Secure access mode General-purpose input/outputs

• Up to 168 I/O ports with interrupt capability

Reset and power management

• 3 separate power domains which can be independently clock-gated or switched off:

– D1: high-performance capabilities

– D2: communication peripherals and timers

– D3: reset/clock control/power management

• 1.62 to 3.6 V application supply and I/Os

• POR, PDR, PVD and BOR

• Dedicated USB power embedding a 3.3 V internal regulator to supply the internal PHYs

• Embedded regulator (LDO) with configurable scalable output to supply the digital circuitry

• Voltage scaling in Run and Stop mode (6 configurable ranges)

• Backup regulator (~0.9 V)

• Voltage reference for analog peripheral/VREF+

• Low-power modes: Sleep, Stop, Standby and VBAT supporting battery charging Low-power consumption

• VBAT battery operating mode with charging capability

• CPU and domain power state monitoring pins

• 2.95 µA in Standby mode (Backup SRAM OFF, RTC/LSE ON)

STM32H750xB features and peripheral counts (continued)

Specifications

Trading Guides