ATMEGA2560-16AU microcontroller MCU 256kB Flash 4kB EEPROM 86 I/O Pins
8-bit Atmel Microcontroller with 16/32/64KB In-System Programmable Flash
Features
Features
• High Performance, Low Power Atmel® AVR® 8-Bit Microcontroller
• Advanced RISC Architecture
– 135 Powerful Instructions
– Most Single Clock Cycle Execution
– 32 × 8 General Purpose Working Registers
– Fully Static Operation
– Up to 16 MIPS Throughput at 16MHz
– On-Chip 2-cycle Multiplier
• High Endurance Non-volatile Memory Segments
– 64K/128K/256KBytes of In-System Self-Programmable Flash
– 4Kbytes EEPROM
– 8Kbytes Internal SRAM
– Write/Erase Cycles:10,000 Flash/100,000 EEPROM
– Data retention: 20 years at 85C/ 100 years at 25C
– Optional Boot Code Section with Independent Lock Bits
• In-System Programming by On-chip Boot Program
• True Read-While-Write Operation
– Programming Lock for Software Security
• Endurance: Up to 64Kbytes Optional External Memory Space
• Atmel® QTouch® library support
– Capacitive touch buttons, sliders and wheels
– QTouch and QMatrix acquisition
– Up to 64 sense channels
• JTAG (IEEE® std. 1149.1 compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Extensive On-chip Debug Support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
– Four 16-bit Timer/Counter with Separate Prescaler, Compare- and Capture Mode
– Real Time Counter with Separate Oscillator
– Four 8-bit PWM Channels
– Six/Twelve PWM Channels with Programmable Resolution from 2 to 16 Bits (ATmega1281/2561, ATmega640/1280/2560)
– Output Compare Modulator
– 8/16-channel, 10-bit ADC (ATmega1281/2561, ATmega640/1280/2560)
– Two/Four Programmable Serial USART (ATmega1281/2561, ATmega640/1280/2560)
– Master/Slave SPI Serial Interface
– Byte Oriented 2-wire Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby
• I/O and Packages
– 54/86 Programmable I/O Lines (ATmega1281/2561, ATmega640/1280/2560)
– 64-pad QFN/MLF, 64-lead TQFP (ATmega1281/2561)
– 100-lead TQFP, 100-ball CBGA (ATmega640/1280/2560)
– RoHS/Fully Green • Temperature Range: – -40C to 85C Industrial
• Ultra-Low Power Consumption
– Active Mode: 1MHz, 1.8V: 500µA
– Power-down Mode: 0.1µA at 1.8V
• Speed Grade:
– ATmega640V/ATmega1280V/ATmega1281V:
• 0 - 4MHz @ 1.8V - 5.5V, 0 - 8MHz @ 2.7V - 5.5V – ATmega2560V/ATmega2561V:
• 0 - 2MHz @ 1.8V - 5.5V, 0 - 8MHz @ 2.7V - 5.5V – ATmega640/ATmega1280/ATmega1281:
• 0 - 8MHz @ 2.7V - 5.5V, 0 - 16MHz @ 4.5V - 5.5V – ATmega2560/ATmega2561:
• 0 - 16MHz @ 4.5V - 5.5V
Specifications
Product Attribute | Attribute Value |
---|---|
Microchip | |
Product Category: | 8-bit Microcontrollers - MCU |
256 kB | |
8 kB | |
TQFP-100 | |
16 MHz | |
10 bit | |
86 I/O | |
4.5 V | |
5.5 V | |
SMD/SMT | |
8 bit | |
- 40 C | |
+ 85 C | |
Tray | |
Brand: | Microchip Technology |
Data RAM Type: | SRAM |
Data ROM Size: | 4 kB |
Data ROM Type: | EEPROM |
Height: | 1 mm |
Interface Type: | 2-Wire, SPI, USART |
Length: | 14 mm |
Moisture Sensitive: | Yes |
Number of ADC Channels: | 16 Channel |
Number of Timers/Counters: | 6 Timer |
Processor Series: | megaAVR |
Product: | MCUs |
Product Type: | 8-bit Microcontrollers - MCU |
Program Memory Type: | Flash |
Subcategory: | Microcontrollers - MCU |
Width: | 14 mm |
Unit Weight: | 0.020459 oz |
Transportations & Payments
Frequently Asked Questions
Shipping:
1, We can shipping all over the world by DHL, UPS, FEdex, TNT and EMS.The packaging is very
safe and strong. Please nitfy me you have any special needs
2, It will take around 3-5 days to reach your hands.
Product Type & condition:
Because of the fluctuant sales situation. the stock parts are always changing and the stock list cannot
be, promptly updated.So please consult the stock situation when you inquire.
Buyer Reading:
1. Please confirm receipt of products if the items you received,and if the goods was damaged please
contact us immediately. send the photo to us that we can check and give you best solution
2. We only guarantee delivery in time but we couldn't control the express delivery time. Our related
sales person will be responsible to send the AWB for the delivered goods in the next workday.
you can check the AWB in the website which we send to you. For the AWByou also can call to the
local branch of the express company in your company.
Pre-sales service :
1. Our team design and make solutions based on different requirements from different customers.
2. We provide 24-hours service,and every message you quote inquiry will be replied within12 hours