Master Touch IIC Interface Small Size 1.5 Inch LCD Touch Panel Assembly
1. Product Description
Master Touch 1.5 inch Touch Panel Assembly is the lamination of touch panel and the LCD module by tape bonding. Compared with the Optical Bonding Technology, the gap between the touch screen and the display is easy for dust and water vapor to enter, and the touch panel assembly attached is also thicker. In addition, this kind of bonding method may appear reflective phenomenon, and the display effect is not as good as the Optical Bonding. But, this bongding method has many merits, for example, the lamination is simpler, the process is more mature, the yield is more stable, and the cost is lower, and it is easy to disassemble.
2. Genaral Specification
2.1 LCD
Size | 1.54 inch |
Resolution | 240 RGB(H)×240(V) |
Outline Dimension | 31.52*33.72 |
Active Area | 27.72*27.72 |
Viewing Direction | ALL |
Operating frequency | 60Hz |
Driving Voltage | 3.3V (Typ.) |
TFT thickness | 1.8mm |
2.2 Touch Panel
Outline Dimension | 51.2*51.2 (Round) | mm |
View Area | 28.12*28.12(1.5 inch) | mm |
TFT thickness | 1.8 | mm |
TP thickness | 0.95 | mm |
Total | 3.05 | mm |
Touch IC | FT6336G | -- |
Number of touchpoint | 5 | points |
Number of button | -- | - |
Interface information driven plate | IIC | - |
The active information | -- | -- |
The type of Bonding with LCD | Frame bonding | |
Operation Temperature | -20℃~70℃ | ℃ |
Storage (cannot exceed 6 months) | Temperature: 23±3℃ (Before installation) Humidity:40%~70%RH | ℃ |
Temperature: -30~80℃ (After installation) | ℃ |
Transparency | 85±10% |
2.4 Electrical Spec.
ESD Touch Side (Touch) | 4kv |
ESD Touch Side (Air) | 8kv |
3. Reliability
High Temperature Operation | 70ºC, 48hrs | -- |
Low Temperature Operation | -20 ºC, 48hrs | Non-condensing |
Operating Temperature/ Humidity | 60ºC/90%RH, 500hrs | Non-condensing |
Thermal Shock | -30 ~ 80℃, 60 mins/cycle, total 48 cycles | -- |
4. Drawing
5. Details
6. Inspection
Equipment/materials: light box, ion fan, humidifier, film card, alcohol/ethyl acetate, finger cover, dust-free cloth, Vernier/digital caliper.
Inspection environment: 30cm ± 5cm from the product, temperature: 22 ± 2 ℃; humidity: 40% ~ 70% RH; cleanliness: Level 10000.
Inspection angle: vertical rotation angle: ± 30 °, from top to bottom; horizontal rotation angle: ± 30 °, from left to right.
Inspection illuminance: fluorescent lamp inspection area illuminance: 150
0-1800lux; table lamp inspection area illuminance: 1500-1800lux; It is convenient for internal uniform illumination requirements.
Background color: Black/white.
Inspection time: the inspection time of one piece of product shall not exceed 15 seconds.
7. FAQ