Minisize PCAP 6 Inch Coffee Machine Screen Display Usage GFF Touch Panel
1. Product Description
Touch screens are common in devices such as game consoles, personal computers, electronic voting machines, and point-of-sale (POS) systems. They can also be attached to computers or, as terminals, to networks. They play a prominent role in the design of digital appliances such as personal digital assistants (PDAs) and some e-readers. Touchscreens are also important in educational settings such as classrooms or on college campuses. And this 6 inch minisize touch panel is commonly used to touch screen display of electrical appliance like coffeemaker, smartphone, etc.
2. Module Specification
2.1 Basic Information
Item | Feature |
Controller | GT1151Q |
Channel | TX :- RX: - |
Power | 3.3V |
Communication | IIC |
Number of Touch point | 10 |
O.S. | Windows/ Android/ Linux |
Power Consumption | 1.Active Mode: Max.120mA @ USB Input 5V 2.Idle Mode: 90mA @ USB Input 5V 3.Sleep Mode: less than 1mA @ USB Input 5V |
Item | Specification | Unit |
Screen Size | 6 | Inch |
Viewing Area | 75.32(L)×133.28(W) | mm |
Cover lens O.D | 80.72(L)×156.42(W) | mm |
Item | Specification | |
Transparency | Viewing Area | ≧85% |
3. Sensor Specification
Item | Specification | Unit | ||
Stacked structure | Cover | 0.71 | mm | |
Top OCA | 0.22 | mm | ||
Sensor Dimension | OD Size | X | 80.32 | mm |
Y | 156.02 | mm |
4. Electrical Specification
Item | Type | Value | Unit | Remarks |
Operating Temperature | - | -20 ~ +80 | ℃ | Humidity 20%~85% RH |
Storage Temperature | - | -30 ~ +80 | ℃ | Humidity 20%~85% RH |
ESD Requirement | ESD air requirement | ±8 | KV | Air |
ESD contact requirement | ±6 | KV | Touch |
5. Test
Item | Specification | Result | |
Cover lens | Ball Drop | 200g ± 2g 35cm | One drop test on each of the 5 selected points, No damage |
Hardness | Pencil: 6H Pressure: 1N/45° | Hardness ≧ 6H | |
Warpage | By Gauge | Warpage 0.1% ≦ Length * | |
FPC/COF | Bending | Bending range0-180° 30times Electrical Function ok | - |
6. Drawing
7. Cosmetic Inspection
The following standard only applies to the visual areas. If the TP function is good, the non-visual appearance may negotiate to relax the standard. W=Width L=length D=Diameter GT=Glass thickness. If soft cloth which dips in alcohol can wipe besmirch, it does not apply to this appearance standards.
Inspection methods and conditions:
1)Inspection environment: Temperature:20-22 ℃; Humidity: 65 + 10% RH;
2)Inspector qualifications: The appearance of product must be inspect by a good eyesight inspector.
3) Inspection methods: The distance between inspector and product should be 30±2cm and putting a lamp 12 to 20 watts of cold white fluorescent lamp in the observation station of product.
8. FAQ