Multi Touch 17 Inch Glass Sensor plus Tempered Glass Cover Touch Panel
1. Product Description
MST G+G Pcap (projected capacitive) touch panel, via a process of sputtering an ITO pattern on a glass substrate to make a G-sensor, then laminate 2 layers of glass together, perceive touch accurately via capacitance coupling. The touch panel size from 8.4 inch to 55 inch with EETI, Weida, ILITEK IC makes multi-touch available.
2. Basic Features
Item | Feature | Remarks |
Controller | ILI2510 | - |
Channel | TX: 40 RX: 50 | - |
Power | 5V | USB: 4.7V ~ 6.0V, Typical:5V |
Communication | USB | USB: 2.0 Full Speed |
Number of Touch point | 10 | - |
O.S. | Windows/ Android/ Linux | plug and play |
Power Consumption | 1.Active Mode: Max.120mA @ USB Input 5V 2.Idle Mode: 90mA @ USB Input 5V 3.Sleep Mode: less than 1mA @ USB Input 5V |
Item | Specification | Unit |
Viewing Area | 338.92(L)×271.34(W) | mm |
Cover Lense O.D. | 388.4(L)×321(W) |
4. Optical Characteristics
Item | Specification | |
Transparency | Viewing Area | ≧85% |
Item | Specification | Unit | ||
Stacked structure | Cover | 2.0 | mm | |
LOCA | 0.2 | mm | ||
ITO | 0.7 |
mm
| ||
Sensor Glass | ||||
ITO | ||||
Sensor Dimension | OD Size | X | 356.92 | mm |
Y | 290.34 | mm |
6. Drawing
7. Details
8. Advantages of G+G Structure
(1)High transmittance,>85%.
(2)Hard and anti-wear surface.The hardness is 6H.
(3)Excellent corrosion resistance.
(4)Sensitive touch and stable performance.
9. Touch Panel FPC Test Items and Criteria
Test Item | Qty (pcs) | Touch Panel FPC Test Items and Criteria |
Direct PullingTest | 5 | Test Conditions: 1. Pulling weight: 500g. 2. Pulling speed: 25 mm/min 3. Pulling angle: 90o 4. After test, verify touch panel functionality via test jig Pass Criterion: - No damage of FPC itself - No any peeling on FPC located on bonding pad area - No functional failure after test |
Bending test
| 5 | Test Conditions: 1. 45 degree bending: 100 times 2. 90 degree bending: 200 times 3. After test, verify touch panel functionality via test jig Pass Criterion : - No damage of FPC itself - No any peeling on FPC located on bonding pad area - No functional failure after test |
5 | Test Conditions: 1. Flex bending: 30 cycles (Each cycle: 0o -> 180o --> 0o) 2. After test, verify touch panel functionality via test jig 3. bending ф=1 mm Pass Criterion : - No damage of FPC itself - No any peeling on FPC located on bonding pad area - No functional failure after test |
10. FAQ