Oil-heating 4 Roll Calender Machine , Four Roll Paper Making Calender Machine

SHR-500A High speed mixer 2sets→S-100L Banbury mixer 1set→SK-Φ660*2300 Mixing mill→SK-Φ610*2030 Mixing mill→SJL-250 Plastic Strainer→SY-4Г Φ610*1830 4-rollers calendering line→Assist machines after calendering

Main character

1. The rollers are made of cold hard cast iron, HS68~72; 1# and 2# rollers are hollow ones, surface roughness Ra0.8; 3# and 4# rollers are drilled ones, surface roughness Ra0.2;
2. Oil heating, with swivel joint and soft metal pipe;
3. Special bearings for calendering machines, high precision and intension, anti abrasive, working life ≧ 60000 hours, can reach 250℃, no oil leaking, compulsory lubrication;
4. The space between 1#, 2# and 4# roller are adjusted by 3 sets of double speed motors which drive the gear boxes;
5. 3#roller has axes cross equipment and pullback equipment, electric adjusting the space, hydraulic lock, the max. cross ±25mm
6. Use 4sets of 6 grade high precision hard tooth gear boxes, low noise, long working life (normal use ≧50000 hours), drive by cardan shaft. The speed of every roller can adjust conveniently;
7. 4#roller equipped with side cutting part to cut the overflowing material cover on the roller and let it back to the 4-roller calendering machine;
8. Eurotherm brand (England) DC controller;
9. With independent thin oil lubrication system, the drive motor can just operate after the lubrication station start;
10. With emergency stop equipments in 4 directions;
11. The bracket is jointed with the steel board, high temp. backfire treatment;

Applications:

Four Roll Calender is Mainly used in calender line for manufacturing soft PVC products such as banner,.

clothes packing bag,wrapping film,plastic floor,PVC leatheroid,etc.

Specifications:

Service:

1. Oversea installation guide.

2. Oversea test running

3. Ovsersea worker training

4. Technical support

5. Spare parts supply

6. Technical operation support

7. Formula and processing support

commercial terms

1. Payment: 30% by T/T as advance payment, balance(70%) by T/T

before shipment

2. Lead Time: 60 days after receiving the advance payment

3. Transportation: container, simple package ( PE film, salver)

4. Warranty period: From the day of the use of the machine in the buyer’s

factory:

(1) The mechanical Parts: 12 months

(2) The electrical Parts: 6 months

5. Installations and Commissioning

(1) Up to date commissioning has been made before shipment

(2) Overseas Commissioning and charges

one or two technicians will be sent to the buyer to guide the

installation and commissioning of the equipment if the customer

requests.

Customers pay the charge of our technicians.

(1) Round-trip Airplane Ticket

(2) Charges of transportation, accommodation and communication

(3) The allowance for the technicians is USD 80 per day for one person.

(4) An interpreter is needed.

6. Spare parts:

Spare parts for one year are needed for the customers, and we suggest

that customers should buy the spare parts. (Fittings list will be

provided.)

7. English manual, Figuration drawing, and footing drawings are

provided.