MachineU > China Products > Consumer Electronic > Camera, Photo & Accessories > Thermal Camera & Scaner
Model F120HB High Accury Single-axis Fiber Optic Gyroscope With 0.01°/hr Bias Drift
Model F120HB High Accury Single-axis Fiber Optic Gyroscope With 0.01°/hr Bias Drift
Specifications
Brand Name :
THUNDSEA
Model Number :
F120HB
Certification :
CCS
Place of Origin :
Qingdao
MOQ :
one set
Payment Terms :
L/C, T/T
Supply Ability :
30 set per month
Delivery Time :
15 Days
Packaging Details :
carton box
Range of measured angular rate (°/s) :
±300
Scale Factor Non-linearity at fixed temperature (ppm) :
≤5
Asymmetry of scaling Factor at Romm Temperature (ppm) :
≤5
Scale Factor Repeatability at fixed temperature (ppm) :
≤5
Scale Factor Reperatability at full temperature range from －40℃ till 60℃ (ppm) :
≤30
Bias Drift at fixed tumperature (10s,1σ,°/h) :
≤0.01
Bias Drift Repeatability at fixed temperature (1σ,°/h) :
≤0.01
Bias Drift Repeatability at full temperature range from －40℃ till 60℃ (1σ,°/h) :
≤0.01
Bias Drift at full temperature range from －40℃ till 60℃ (100s,1σ,°/h) :
≤0.1
Random Walk (°/√h) :
≤0.003
Random vibration (°/h) :
≤0.1
Shock (°/h) :
≤0.1
Resolving power :
≤0.5
Zero deviation change bdfore and after vibration (°/h) :
≤0.01
Zero bias sensitivity (°/h/GS) :
＜0.5
Storage temperature :
－50℃~70℃
Operating temperature :
－40℃~60℃
Description

Model F120HB High Accury Single-axis Fiber Optic Gyroscope With 0.01°/hr Bias Drift

1. Product introduction

1.1 Working Principle and Function

This product is an inertial angular rate sensor based on the principle of Sagnac effect, which is used to measure the angular rate movement of the carrier around the sensitive axis of this sensor. This unit takes the fiber optic coil as the angular rate sensitive unit and the closed-loop detection circuit as the basis. Two beams from a laser are injected into the same fibre but in opposite directions. Due to the Sagnac effect, the beam travelling against the rotation experiences a slightly shorter path delay than the other beam. The resulting differential phase shift is measured through interferometry, thus translating one component of the angular velocity into a shift of the interference pattern which is measured photometrically.
Beam splitting optics launches light from a laser diode into two waves propagating in the clockwise and anticlockwise directions through a coil consisting of many turns of optical fibre. The strength of the Sagnac effect is dependent on the effective area of the closed optical path: this is not simply the geometric area of the loop but is enhanced by the number of turns in the coil.
This product is an inertial sensor composed of optical system, corresponding power supply and data processing circuit. It can provide three-axis angle increment information.

1.2 Configuration

The product is mainly composed of the following components:

a) Optical part: light source, coupler, Y modulator, fiber coil, detector;

b) Circuit part: processor board, light source board and preamplifier;

c) Structural part: body, cover, etc.1.3 shape and installation size

1.3 Shape and installation size

Outline size (120 ± 0.1)mm × (120 ± 0.1) mm × (38 ± 0.5)mm,

Installation dimensions (94 ± 0.1 mm) × (94 ± 0.1mm)

1.4 Weight

850g ± 20g

1.5 Performance parameters

Index name Index requirements Remarks

Range of measured angular rate

(°/s)

±300

Scale Factor Non-linearity at

fixed temperature

(ppm)

≤5

Asymmetry of scaling Factor

at Romm Temperature

(ppm)

≤5

Scale Factor Repeatability at

fixed temperature

(ppm)

≤5

Scale Factor Reperatability at

full temperature range from －40℃ till 60℃

(ppm)

≤30

Bias Drift at fixed tumperature

(10s,1σ,°/h)

≤0.01

Bias Drift Repeatability at

fixed temperature

(1σ,°/h)

≤0.01

Bias Drift Repeatability at

full temperature range from －40℃ till 60℃

(1σ,°/h)

≤0.01

Fixed-point constant

temperature test

Bias Drift at full temperature

range from －40℃ till 60℃

(100s,1σ,°/h)

≤0.1

Off line

compensation

Random Walk

(°/√h)

≤0.003

Warm up time

(min)

0

Random vibration

(°/h)

≤0.1

The difference between

the mean of zero

deviation before and after vibration

Shock

(°/h)

≤0.1

Zero deviation before and after

impact

Resolving power ≤0.5

Zero deviation change

bdfore and after vibration

(°/h)

≤0.01

Zero bias sensitivity

(°/h/GS)

＜0.5
Storage temperature －50℃~70℃
Operating temperature －40℃~60℃

1.6 Mechanical and electrical interfaces

1.6.1 Mechanical interface

The mounting surface of the product constitutes the fixed surface for external installation, and the mounting screw is M6.

1.6.2 Power requirements

Dc power supply: ± (5 V±0.25V)

Ripple: 20mV

The output power: ≥6W

1.6.3 Electrical interface

Zja12-01t socket pin number Physical meaning Note
1 ＋5V
2 GND
3 －5V
9 The reserved interface
10 The reserved interface
11 T＋
12 T－

Product tags

interferometric fiber optic gyroscope

,

fiber optic gyroscope

,

fiber optics gyroscope
Send your message to this supplier
Send Now

Model F120HB High Accury Single-axis Fiber Optic Gyroscope With 0.01°/hr Bias Drift

Ask Latest Price
Product Detail
Brand Name :
THUNDSEA
Model Number :
F120HB
Certification :
CCS
Place of Origin :
Qingdao
MOQ :
one set
Payment Terms :
L/C, T/T
Contact Supplier
Model F120HB High Accury Single-axis Fiber Optic Gyroscope With 0.01°/hr Bias Drift

QINGDAO THUNDSEA MARINE TECHNOLOGY CO.,LTD

Verified Supplier
6 Years
Since 2014
Business Type :
Manufacturer, Distributor/Wholesaler, Agent, Importer, Exporter
Main Products :
Inertial Navigation System, Laser Inertial Navigation System, Fiber Optic Gyrocompass
Total Annual :
4,800,000-5,200,000
Employee Number :
100~120
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Fiber Optic Gyroscope
MachineU China Products Consumer Electronic Camera, Photo & Accessories Thermal Camera & Scaner
Contact Supplier
Submit Requirement