Specifications
Brand Name :
thundsea
Model Number :
U32
Certification :
CCS
Place of Origin :
China
Power supply :
Replaceable battery or universal input 5V DC adapter,DC12,USB Port (5V DC),2AA alkaline battery,100~240V
item :
Fiber Optic Gyroscope
Description

Model U32 High Accury There-axis Fiber Optic Gyroscope With 0.5 °/hr Bias Drift

1. Product introduction

1.1 Working principle and functions

The strapdown inertial group of U32 fog is an inertial sensor developed for tactical military systems. U32 by three solid-state fiber optic gyroscope, quartz flexible accelerometer, data packaging board, ontology structure and related software and so on, measure the angular velocity and linear acceleration of the vehicle movement, and temperature, install the misalignment Angle, nonlinear, zero error compensation, as the carrier's attitude and navigation control to provide information, measurement results through RS422 serial bus output.

1.2 Overall dimensions

Overall dimensions:Φ(99.5±0.2)mm×(79.5±0.2)mm×(89.2±0.5)mm

The pitch of the installation:(91±0.05)mm×(71±0.05)mm
Model U32 High Accury There-axis Fiber Optic Gyroscope With 0.5 °/hr Bias Drift

1.3 Weight
850g±60g

1.4 Performance parameters

The parameter name Required value Note

Range of measured angular rate
(º/s)

±500

Add meter measurement range
(g)

±30

Bias Drift Repeatability at
fixed temperature
(10s,1σ,º/h)

≤0.5 Normal

Bias Drift at fixed temperature
(10s,1σ,º/h)

≤0.5 Normal

Bias Drift at full temperature
range from -40° C till 60° C
(10s,1σ,º/h)

≤1 Variable

Add table zero bias repeatability
(10s,1σ,mg)

≤0.5 Normal

Bias Voltage Drift at Fixed Temperature with Meter

(10s,1σ,mg)

≤0.5 Normal

Scale Factor Non-Linearity at
full temperature range from
-40°C till 60° C
(ppm)

≤300

Scale Factor Repeatability at
full temperature range from -40°C till 60° C
(ppm)

≤300

Add scale factor nonlinearity and asymmetry

(ppm)

≤500

Add table scale factor repeatability

(ppm)

≤500

Vibration gyro

(º/h)

Before and in the vibration 1
Vibration in and after
After and before vibration

Add table vibration

(mg)

Before and in the vibration 1
Vibration in and after
After and before vibration

1.5 Mechanical and electrical interface

1.5.1 Mechanical interface

The mounting surface of the product constitutes the fixed surface for external installation, and the mounting screw is M4.

1.5.2 External power supply and power consumption requirements

Voltage Voltage range Ripple(RMS) Current
+28V ±5% ≤100mV ≤3.00 A(Switch on the transient)
≤1.00 A( Steady state)

1.5.3 Eelectrical connection interface

The power supply and signal transmission of the strapdown inertial group of the U32 fog are transmitted uniformly through a j30-31zk socket

Model U32 High Accury There-axis Fiber Optic Gyroscope With 0.5 °/hr Bias DriftModel U32 High Accury There-axis Fiber Optic Gyroscope With 0.5 °/hr Bias DriftModel U32 High Accury There-axis Fiber Optic Gyroscope With 0.5 °/hr Bias DriftModel U32 High Accury There-axis Fiber Optic Gyroscope With 0.5 °/hr Bias Drift

Node number Name Note
28,29 28V Power supply
30,31 28V Ground wire
7,23 IMU-TXD+

RS422 interface

T:Signal output

R:Signal input

8,24 IMU-TXD-
9,25 IMU-RXD+
10,26 IMU-RXD-
11 RS232-TX-1 RS232-1
12 RS232-RX-1
13 RS232-GND-1
14 RS232-TX-2 RS232-2
15 RS232-RX-2
16 RS232-GND-2
Send your message to this supplier
Send Now

Model U32 High Accury There-axis Fiber Optic Gyroscope With 0.5 °/hr Bias Drift

Ask Latest Price
Brand Name :
thundsea
Model Number :
U32
Certification :
CCS
Place of Origin :
China
Power supply :
Replaceable battery or universal input 5V DC adapter,DC12,USB Port (5V DC),2AA alkaline battery,100~240V
item :
Fiber Optic Gyroscope
Contact Supplier
Model U32 High Accury There-axis Fiber Optic Gyroscope With 0.5 °/hr Bias Drift

QINGDAO THUNDSEA MARINE TECHNOLOGY CO.,LTD

Verified Supplier
6 Years
Since 2014
Business Type :
Manufacturer, Distributor/Wholesaler, Agent, Importer, Exporter
Total Annual :
4,800,000-5,200,000
Employee Number :
100~120
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement