VFD AC Output Reactor VFD reactor 315kw Three Phases RACL 2% SDK-800-0.0088
►Products Overview
Input and output reactor for variable frequency speed regulation: inverter and governor during use, often suffer from the surge current and surge voltage impact, the performance will be severely damaged and the service life of the converter and the governor, so to use input reactor arranged on the front, to suppress the surge voltage and surge current protection, inverter and governor, extend the service life and prevent the harmonic interference, at the same time, as the frequency converter and adopts frequency conversion speed governor is the way, so often produce harmonics and waveform distortion in the speed, will affect the normal use of equipment, therefore, require the installation of a reactor output on the output side, to filter out the harmonic voltage and current, improve the quality of power grid.
►Working Diagram
►Working condition:
1. Operation environment: No need derated suing during -10℃ to 45℃, if work in above 45℃, the rated current will be reduced 2% for every 1℃ rising.
2. Protection class: IP00-IP22.
3. Voltage drop:< 4%,if large than this value,the output torque of the inverter will be lower.
4.overload tolerance capability:1.5% rated current for 60s.
5. Noise:≤65DB.
6. Temperature rise:≤85K.
7. Dielectric strength: Steel wire core 3000VAC/50Hz/5mA/10s no electric arcing puncture.
8. Insulation resistor:1000VDC insulation resistance value ≥100MΩ.
9. working under sea level below 2000m.
10.Running condition:temperature-25℃ to 45℃, comparative moisture not over 90%.
11.No hazardous gas, no inflammable, and explosive.
12.Good ventilation.
►Product application: