Single Piece PMMA Intraocular Lens Model PC156C55

Since 1949 Intraocular lenses have been made of PMMA, due to its lightness, clarity and stability. Even today, PMMA is the material of choice. PMMA offers outstanding stability and optical quality for a predictable outcome and maximum performance. Millions of odd eyes have been implanted with our basic and premium range of PMMA lenses with excellent outcome. Thanks to the inherent quality of the material.

Single Piece PMMA Intraocuolar Lens PC156C55 is optical implants,which are made of polymethyl methacrylate(PMMA) for the replacement of the human lens and correct the refraction of aphakia by ophthalmic surgey. IOL spectra transmission in the range 430nm to 1100nm shall not be less than 90%: its cut-off wave length shall not be less than 360nm at 10%(spectra transmission) and the spectra transmission in the range of UV scope(less than 360nm) shall be less than 10%.

Single Piece PMMA Intraocular Lens PC156C55 spectrum transmittance graph

Single Piece PMMA Intraocular Lens PC156C55 Indications

Single Piece PMMA Intraocular Lens PC156C55 can be used to correct the vision of aphakia eyes either in the primary and secondary surgey under the option of the surgeons.

Single Piece PMMA Intraocular Lens PC156C55 Design features:

1- The IOL produced by our company is made of PMMA, allowing the good flexibility of the loops,which can be bent to the optical part of the IOL, making the IOL implanted easily inside the capsular bag.

2- The 10°angle of the haptic allows the lens to have a complete contact with the posterior side of the lens capsule.

3- The thin edge of the IOL reduces the edge glare in a large degree.

4- The haptic are designed to maintain stability of lens implant in the eye, which keeps the IOL centered in the optical field.

5- The IOL produced by our company can filter the ultraviolet rays effectively, and the rate of the visible light is greater than 90%.