Industrial Lte Router IOT Cellular Modem With Relay Control For Remote Monitoring
- Introduction of IOT Cellular Modem
- 4G IOT Cellular Modem ZHC4941 is an industrial-grade 4G RTU that provides 8 DI, 8 DO, 8 AI and 1 RS485/232 interface, supports local logic processing operations, automatic acquisition and active reporting, Modbus RTU/TCP adaptation, and automatic threshold calibration Special functions such as reporting, configuration software docking, dry and wet node IO detection, support one-to-one, many-to-one network.
Parameters of IOT Cellular Modem
| |
Number of ports | RS485*1 | Number of interfaces | 8 Relay output |
Standard | RS485: A, B | Standard | DO*8, COM*2 |
Baud rate | 600~921600bps | Mechanical durability | 10^7 |
Data bit | 8, 9 | Electrical durability | 10^5 |
Stop bit | 0.5, 1, 1.5, 2 | Capacity | 5A 250VAC 30VDC |
Check Bit | NONE EVEN ODD | |
| Number of interfaces | 8 Relay input |
Voltage | 9~36V | Standard | DI*8, COM*2 |
Current | 60mA(aver) @9V 30mA(aver) @36V | Detection range (wet node) | 5~50V->High0~2V->Low |
| |
ESD | IEC61000-4-2, Level 4 | Number of Interfaces | 8 Analog input |
Surge | IEC61000-4-2, Level 3 | Standard | AI*8, COM*2 |
Group pulse | IEC61000-4-2, Level 3 | Scope of test | 4~20mA |
Working Mode of IOT Cellular Modem
1.HTTP Client
Support serial data transmission to designated server via HTTP.
2. TCP Client
The serial server actively initiates a TCP connection to the server. If it fails, it will continue to reconnect until it succeeds. If the connection is successful, the server and the serial device can perform two-way transparent data transmission.
- Application
- of
- IOT Cellular Modem
-
-
-
- IOT Cellular ZHC4941 can be applied to an intelligent remote meter reading system. According to customer needs, the monitoring center can realize remote shutdown of water and electricity to terminal users through the data acquisition control terminal. When the transmission data is abnormal, the monitoring center can alarm and display. Relevant staff can repair the field instruments in a targeted manner. Mainly used in factories, hotels, schools, hospitals and other large users of water consumption and the total amount of water in various regions, and remote meter reading of electricity consumption of large users such as substations, distribution stations, enterprises and institutions, schools, hospitals, etc.








| ZHC4941 |
RS485 Modbus | √ |
RS485 Automatic Acquisition | √ |
Virtual Serial Port | √ |
Connfiguration Software | √ |
Threshold Report | √ |
Configuration Software Docking | √ |
Modbus RTU/TCP | √ |