low cost data acquisition system, web data logger with cloud server

System Feature

• Cortex M3 32-bit ARM
• 24×7 working, soft and hardware Double watchdog
• Dual digital filters for anti-noise
• Stable reconnection strategy for data transmit
• Automatically or manually update interior clock by sms or NTP or server
• Configurable action schedule(second, minute, day, week, month)
• Event-based linkage programming, e.g. alarm linkage output
• Provide configure software, visual programming, over 100 parameters can be set
• Optional inside battery that life is 8-20 hours, cellular module Intelligent sleep when power lost

DI feature

• Accept NO or NC dry contact

DO(T) feature

• Open-collector output(drive voltage=power supply voltage, Drive current≤500mA)
• on/off/pulse DO by remote control or local event
• Status memory function for power lost

DO(K) feature

• Relay NO contact output(load: 2A / 125VAC,220VDC)
• on/off/pulse DO by remote control or local event
• Remember status when power lost

AI feature

• 4-20mA (option: 0-5V) in, Sampling frequency: 33Hz, 10-bit precision)
• Convert 4-20mA(0-5V) to physical value
• Support offset and gain, alarm parameters, upload data setting
• Sensor disconnect alarm

SMS feature

• Support 10 cell phone numbers for alarm and control
• Send sms alarm when input is triggered or reach alarm level
• Editable alarm and recover sms with time stamp
• Query any IO channel’s status or value via sms command
• Control output via sms command
• Can set interval to report IO channel's status or value by sms
• Remote setting via sms commands
• Forward simcard overdue sms to admin
• Support power lost sms alarm and recover sms(works with inside battery)

Wireless network communication

• Option network: cellular(2g/3g/4g) or Wi-Fi
• TCP/IP connect at most 4 servers(support Static IP address or domain)
• Support post or respond mode for data communication
• Communicate with server by optional Cwt_IO, Modbus TCP, http post protocol
• Transfer RS485 or RS232 Data to wireless network

Modbus feature

• Can work as a modbus master to poll salve over RS485
• Can work as a modbus slave to be read/write by master(HMI, SCADA etc.)
• Support Modbus RTU to TCP convert over Ethernet or GPRS/3G