Product Introduction:
Handheld RFID PDA reader is a very important part as hardware to capture data and information in the Internet Of Things. This handheld RFID reader/writer AH 2202 is a highly integrated unit combining high performance with low power microarchitecture, and it includes an 5.0 inch IPS touch screen, 6 key interface, audio control (output), SD slot, IC card slot, contactless HF RFID, GPRS, WCDMA, WiFi and Bluetooth connectivity.
Product Features:
Technical Specification | ||
Operating System | Android 7.0 | |
CPU | Cortex A9 1.2GHz (dual core) | |
RAM / ROM | RAM: 1GB ROM: 8GB | |
Display | 5.0 inch IPS panel, Resolution:480*800,HD full viewing angle, viewable under sunshine | |
Keyboard | Number keyboard and function keyboard | |
Touch Screen | Support multi-point capacitive touch screen, workable with glove | |
Micro SD card | Support 32G MICRO SD card | |
Audio | Support voice announment | |
Wireless Communication | GPRS | GPRS, EDGE, 4-band 900/1800, 850/1900 |
4G | ||
WIFI | Meet IEEE 802.11b/g | |
Bluetooth | Meet Bluetooth 4.0 | |
Indicator Light | Internet indicator light, charging indicator light | |
Battery | Capacity | 4500mAh lithium polymer |
Stand-by Time | When fully charged, close wireless communication functions and stand-by time is 200h and above | |
Operating Time | >5h | |
Charging Time | <4h | |
RFID Parameters | ||
Compatible Protocol | ISO 15693 | |
Operating Frequency | 13.56 MHz | |
RF Power | 0.25-1.5W | |
Reading Range | 30cm (standard RFID card) | |
Anti-collision Algorithm | Support | |
Working Environment | ||
Operating Temperature | -10℃~70℃ | |
Storage Temperature | -20℃~85℃ | |
Relative Humility | 10%~90% RH, no condense | |
Physical Parameters | ||
Gross Weight | <388g | |
Dimension | 170*85*23 ± 2mm |
Product Application:
Due to its easy operating and long distance reading range, it could be widely used for RFID ticket identification, assets management, warehouse inventory, etc.